eric6 198b9587-14d9-4479-8224-760a678b27b8

checking if we should skip the build
started at: Tue Mar 14 09:42:16 2017
fetching https://srcbuilder.pld-linux.org/th//srpms/198b9587-14d9-4479-8224-760a678b27b8/eric6-17.03.1-1.src.rpm
fetched 18634615 bytes, 3154.3 K/s
installing srpm: eric6-17.03.1-1.src.rpm
mesg: ttyname failed: Inappropriate ioctl for device
+ install -d /tmp/B.f3yII8/BUILD /tmp/B.f3yII8/RPMS
+ LC_ALL=en_US.UTF-8
+ rpm -qp --changelog eric6-17.03.1-1.src.rpm
* Tue Mar 14 2017 PLD Linux Team <feedback@pld-linux.org>
- For complete changelog see: http://git.pld-linux.org/?p=packages/eric6.git;a=log;h=master

* Mon Mar 13 2017 Mateusz Korniak <matkor@pld-linux.org> 50968d5
- Version 17.03.1. Rel 1.
Switched to python3 (python2 as conditinal build)
Suggests pylints

* Mon Mar 13 2017 Mateusz Korniak <matkor@pld-linux.org> 30e2390
- Version 17.03.01. Rel 0.1

* Mon Feb 13 2017 Mateusz Korniak <matkor@pld-linux.org> fd4f94e
- Version 17.02.1 (new versioning scheme). Rel 1.
Works, but throws exceptions on start.

* Mon Oct 10 2016 Mateusz Korniak <matkor@pld-linux.org> 4fe3d75
- Release 1. Works for me.

* Mon Oct 10 2016 Mateusz Korniak <matkor@pld-linux.org> a9909cc
- Version 6.1.10
Moved eric6.appdata.xml to %{_datadir}/appdata/

* Wed Sep 21 2016 Mateusz Korniak <matkor@pld-linux.org> 2758d54
- Version 6.1.9

* Fri Sep 02 2016 Mateusz Korniak <matkor@pld-linux.org> d5275b1
- Release 1. Works for me.

* Fri Sep 02 2016 Mateusz Korniak <matkor@pld-linux.org> 15c587b
- Killed rest of py2/3 ifs.

* Thu Sep 01 2016 Mateusz Korniak <matkor@pld-linux.org> 5c2f16b
- Adapterized.

* Thu Sep 01 2016 Mateusz Korniak <matkor@pld-linux.org> e2cab00
- Initial version 6.1.8.

+ rpm -Uhv --nodeps --define '_topdir /tmp/B.f3yII8' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' eric6-17.03.1-1.src.rpm
Preparing...                ##################################################
eric6                       ##################################################
+ rm -f eric6-17.03.1-1.src.rpm
mesg: ttyname failed: Inappropriate ioctl for device
+ install -m 700 -d /tmp/B.f3yII8/BUILD/tmp
mesg: ttyname failed: Inappropriate ioctl for device
+ TMPDIR=/tmp/B.f3yII8/BUILD/tmp
+ exec nice -n 0 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.f3yII8' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-pld-linux --define 'prep exit 0' /tmp/B.f3yII8/eric6.spec
Building target platforms: x86_64-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	python3-PyQt5-qscintilla2 is needed by eric6-17.03.1-1.src
rpm: 	python3-PyQt5-uic is needed by eric6-17.03.1-1.src
rpm: Building target platforms: x86_64-pld-linux
updating poldek cache...

ready is up to date

Retrieving th::packages.ndir.md...
th is up to date

Retrieving th::packages.ndir.md...
th is up to date

Retrieving th-ready::packages.ndir.md...
th-ready is up to date

Retrieving th-ready::packages.ndir.md...
th-ready is up to date

Retrieving th-test::packages.ndir.md...
Retrieving th-test::packages.ndir.diff.toc.gz...

Retrieving diff::packages.ndir.2017.03.13-17.50.01.gz...
..............................done
Retrieving diff::packages.ndir.dscr.2017.03.13-17.50.01.gz...
Loading [pndir]th-test...
Applying packages.ndir.2017.03.13-17.50.01.gz...

Retrieving diff::packages.ndir.2017.03.13-21.09.02.gz...
..............................done
Retrieving diff::packages.ndir.dscr.2017.03.13-21.09.02.gz...
Applying packages.ndir.2017.03.13-21.09.02.gz...

Writing /root/.poldek-cache/[...]/packages.ndir.gz...

Retrieving th-test::packages.ndir.md...
th-test is up to date
checking conflicting packages in BRed packages
poldek: Loading [pndir]ready...
poldek: Loading [pndir]th-test...
poldek: Loading [pndir]th-test...
poldek: Loading [pndir]th-ready...
poldek: Loading [pndir]th-ready...
poldek: Loading [pndir]th...
poldek: Loading [pndir]th...
poldek: 28269 packages read
poldek: Removed 1734 duplicate packages from available set
poldek: Processing dependencies...
poldek: python3-PyQt5-qscintilla2-2.9.1-5.x86_64 marks qscintilla2-qt5-2.9.1-5.x86_64 (cap qscintilla2-qt5 = 2.9.1-5)
poldek: There are 3 packages to install (1 marked by dependencies):
poldek: I python3-PyQt5-qscintilla2-2.9.1-5.x86_64
poldek: I python3-PyQt5-uic-5.7.1-1.x86_64
poldek: D qscintilla2-qt5-2.9.1-5.x86_64
poldek: This operation will use 6.7MB of disk space.
poldek: Need to get 1.2MB of archives (1.2MB to download).
poldek: 
poldek: Retrieving [1/3] th::qscintilla2-qt5-2.9.1-5.x86_64.rpm...
poldek: ..............................done
poldek: Retrieving [2/3] th::python3-PyQt5-qscintilla2-2.9.1-5.x86_64.rpm...
poldek: ..............................done
poldek: Retrieving [3/3] th::python3-PyQt5-uic-5.7.1-1.x86_64.rpm...
poldek: ..............................done
poldek: Executing pm-command.sh --upgrade -vh --test --root / --define _check_dirname_deps 1...
poldek: Preparing...                ##################################################
no conflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	python3-PyQt5-qscintilla2 is needed by eric6-17.03.1-1.src
rpm: 	python3-PyQt5-uic is needed by eric6-17.03.1-1.src
rpm: Building target platforms: x86_64-pld-linux
installing BR: python3\-PyQt5\-qscintilla2 python3\-PyQt5\-uic
+ poldek --noask --caplookup -Q -v --upgrade python3-PyQt5-qscintilla2 python3-PyQt5-uic
Loading [pndir]ready...
Loading [pndir]th-test...
Loading [pndir]th-test...
Loading [pndir]th-ready...
Loading [pndir]th-ready...
Loading [pndir]th...
Loading [pndir]th...
28269 packages read
Removed 1734 duplicate packages from available set
Processing dependencies...
python3-PyQt5-qscintilla2-2.9.1-5.x86_64 marks qscintilla2-qt5-2.9.1-5.x86_64 (cap qscintilla2-qt5 = 2.9.1-5)
There are 3 packages to install (1 marked by dependencies):
I python3-PyQt5-qscintilla2-2.9.1-5.x86_64  
I python3-PyQt5-uic-5.7.1-1.x86_64
D qscintilla2-qt5-2.9.1-5.x86_64
This operation will use 6.7MB of disk space.
Need to get 1.2MB of archives. 
Executing pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1...
Preparing...                ##################################################
qscintilla2-qt5             ##################################################
python3-PyQt5-qscintilla2   ##################################################
python3-PyQt5-uic           ##################################################
building RPM using: set -ex; : build-id: 198b9587-14d9-4479-8224-760a678b27b8; TMPDIR=/tmp/B.f3yII8/BUILD/tmp exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j5' --define '_make_opts -Otarget' --define '_pld_builder 1' --define '_topdir /tmp/B.f3yII8' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD'  --target x86_64-pld-linux /tmp/B.f3yII8/eric6.spec
mesg: ttyname failed: Inappropriate ioctl for device
+ : build-id: 198b9587-14d9-4479-8224-760a678b27b8
+ TMPDIR=/tmp/B.f3yII8/BUILD/tmp
+ exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j5' --define '_make_opts -Otarget' --define '_pld_builder 1' --define '_topdir /tmp/B.f3yII8' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-pld-linux /tmp/B.f3yII8/eric6.spec
Building target platforms: x86_64-pld-linux
Executing(%prep): /bin/sh -e /tmp/B.f3yII8/BUILD/tmp/rpm-tmp.18049
+ umask 022
+ cd /tmp/B.f3yII8/BUILD
+ cd /tmp/B.f3yII8/BUILD
+ rm -rf eric6-17.03.1
+ /bin/tar -xf -
+ /usr/bin/gzip -dc /tmp/B.f3yII8/eric6-17.03.1.tar.gz
+ STATUS=0 
+ '[' 0 -ne 0 ']'
+ cd eric6-17.03.1
+ /bin/id -u
+ '[' 1000 '=' 0 ']'
+ /bin/id -u
+ '[' 1000 '=' 0 ']'
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /tmp/B.f3yII8/BUILD/tmp/rpm-tmp.18049
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/home/users/builder/GNUstep/Tools:/usr/local/bin:/usr/bin:/bin:/home/users/builder/bin
TMPDIR=/tmp/B.f3yII8/BUILD/tmp
+ umask 022
+ cd /tmp/B.f3yII8/BUILD
+ cd eric6-17.03.1
+ exit 0
Executing(%install): /bin/sh -e /tmp/B.f3yII8/BUILD/tmp/rpm-tmp.18049
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/home/users/builder/GNUstep/Tools:/usr/local/bin:/usr/bin:/bin:/home/users/builder/bin
TMPDIR=/tmp/B.f3yII8/BUILD/tmp
+ umask 022
+ cd /tmp/B.f3yII8/BUILD
+ /bin/rm '--interactive=never' -rf /tmp/B.f3yII8/BUILD/tmp/eric6-17.03.1-root-builder
+ /bin/mkdir -p /tmp/B.f3yII8/BUILD/tmp/eric6-17.03.1-root-builder
+ cd eric6-17.03.1
+ rm -rf /tmp/B.f3yII8/BUILD/tmp/eric6-17.03.1-root-builder
+ python3 install.py -z -c -b /usr/bin -d /usr/share/python3.6/site-packages -i /tmp/B.f3yII8/BUILD/tmp/eric6-17.03.1-root-builder '--pyqt=5'
Checking dependencies
Python Version: 3.6.0
Found PyQt5
Found pyuic5
Found QScintilla2
Found QtGui
Found QtNetwork
Found QtPrintSupport
Found QtSql
Sorry, please install QtSvg.
Error: libQt5Svg.so.5: cannot open shared object file: No such file or directory
Found QtWidgets
error: Bad exit status from /tmp/B.f3yII8/BUILD/tmp/rpm-tmp.18049 (%install)


RPM build errors:
    Bad exit status from /tmp/B.f3yII8/BUILD/tmp/rpm-tmp.18049 (%install)
ended at: Tue Mar 14 09:42:43 2017, done in 0:00:01.772022
error: No files produced.
mesg: ttyname failed: Inappropriate ioctl for device
+ chmod -R u+rwX /tmp/B.f3yII8/BUILD
+ rm -rf /tmp/B.f3yII8/tmp /tmp/B.f3yII8/BUILD
mesg: ttyname failed: Inappropriate ioctl for device
+ rm -rf /tmp/B.f3yII8
Begin-PLD-Builder-Info
Build-Time: user:7.74s sys:1.54s real:26.99s (faults io:45 non-io:354590)

End-PLD-Builder-Info