perl-MooX-TypeTiny B938190A-DE4A-4240-BF2C-2A328BD61D0D

checking if we should skip the build
started at: Tue Jul 21 10:47:17 2020
killing old processes on a builder
sending signal 9 to pid -1
Killed
cleaning up /tmp
fetching https://srcbuilder.pld-linux.org/th//srpms/B938190A-DE4A-4240-BF2C-2A328BD61D0D/perl-MooX-TypeTiny-0.002003-1.src.rpm
fetched 21307 bytes, 82.0 K/s
installing srpm: perl-MooX-TypeTiny-0.002003-1.src.rpm
+ install -d /tmp/B.dFNpXf/BUILD /tmp/B.dFNpXf/RPMS
+ LC_ALL=en_US.UTF-8
+ rpm -qp --changelog perl-MooX-TypeTiny-0.002003-1.src.rpm
* Tue Jul 21 2020 PLD Linux Team <feedback@pld-linux.org>
- For complete changelog see: http://git.pld-linux.org/?p=packages/perl-MooX-TypeTiny.git;a=log;h=master

* Tue Jul 21 2020 Arkadiusz Miśkiewicz <arekm@maven.pl> 705b933
- initial

+ rpm -Uhv --nodeps --define '_topdir /tmp/B.dFNpXf' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' perl-MooX-TypeTiny-0.002003-1.src.rpm
Preparing...                ##################################################
perl-MooX-TypeTiny          ##################################################
+ rm -f perl-MooX-TypeTiny-0.002003-1.src.rpm
+ install -m 700 -d /tmp/B.dFNpXf/BUILD/tmp
+ TMPDIR=/tmp/B.dFNpXf/BUILD/tmp
+ exec nice -n 0 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.dFNpXf' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-pld-linux --define 'prep exit 0' /tmp/B.dFNpXf/perl-MooX-TypeTiny.spec
Building target platforms: x86_64-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	perl-Type-Tiny >= 1.008 is needed by perl-MooX-TypeTiny-0.002003-1.src
rpm: Building target platforms: x86_64-pld-linux
updating poldek cache...
ready is up to date
th is up to date
th is up to date
th-ready is up to date
th-ready is up to date
Loading [pndir]th-test...
Applying packages.ndir.2020.07.21-07.44.05.gz...

Writing /root/.poldek-cache/[...]/packages.ndir.gz...
th-test is up to date
checking conflicting packages in BRed packages
poldek: Loading [pndir]ready...
poldek: Loading [pndir]th-test...
poldek: Loading [pndir]th-test...
poldek: Loading [pndir]th-ready...
poldek: Loading [pndir]th-ready...
poldek: Loading [pndir]th...
poldek: Loading [pndir]th...
poldek: 30827 packages read
poldek: Removed 2351 duplicate packages from available set
poldek: Processing dependencies...
poldek: perl-Type-Tiny-1.006000-1.noarch marks perl-Reply-0.42-1.noarch (cap /usr/share/perl5/vendor_perl/Reply/Plugin)
poldek:  perl-Reply-0.42-1.noarch marks perl-App-Nopaste-1.013-1.noarch (cap perl(App::Nopaste))
poldek:   perl-App-Nopaste-1.013-1.noarch marks perl-Getopt-Long-Descriptive-0.096-1.noarch (cap perl(Getopt::Long::Descriptive))
poldek:   perl-App-Nopaste-1.013-1.noarch marks perl-JSON-MaybeXS-1.004000-1.noarch (cap perl(JSON::MaybeXS))
poldek:   perl-App-Nopaste-1.013-1.noarch marks perl-WWW-Mechanize-1.95-1.noarch (cap perl(WWW::Mechanize))
poldek:    perl-WWW-Mechanize-1.95-1.noarch marks perl-HTML-Form-6.07-1.noarch (cap perl(HTML::Form) >= 1.00)
poldek:  perl-Reply-0.42-1.noarch marks perl-B-Keywords-1.20-1.noarch (cap perl(B::Keywords))
poldek:  perl-Reply-0.42-1.noarch marks perl-Class-Refresh-0.07-2.noarch (cap perl(Class::Refresh) >= 0.05)
poldek:   perl-Class-Refresh-0.07-2.noarch marks perl-Class-Unload-0.11-1.noarch (cap perl(Class::Unload))
poldek:  perl-Reply-0.42-1.noarch marks perl-Config-INI-Reader-Ordered-0.020-1.noarch (cap perl(Config::INI::Reader::Ordered))
poldek:   perl-Config-INI-Reader-Ordered-0.020-1.noarch marks perl-Config-INI-0.025-1.noarch (cap /usr/share/perl5/vendor_perl/Config/INI)
poldek:    perl-Config-INI-0.025-1.noarch marks perl-Mixin-Linewise-0.108-1.noarch (cap perl(Mixin::Linewise::Readers) >= 0.105)
poldek:     perl-Mixin-Linewise-0.108-1.noarch marks perl-PerlIO-utf8_strict-0.007-2.x86_64 (cap perl(PerlIO::utf8_strict))
poldek:  perl-Reply-0.42-1.noarch marks perl-Data-Printer-0.40-1.noarch (cap perl(Data::Printer))
poldek:   perl-Data-Printer-0.40-1.noarch marks perl-Clone-PP-1.07-1.noarch (cap perl(Clone::PP))
poldek:   perl-Data-Printer-0.40-1.noarch marks perl-Sort-Naturally-1.03-1.noarch (cap perl(Sort::Naturally))
poldek:  perl-Reply-0.42-1.noarch marks perl-Proc-InvokeEditor-1.13-1.noarch (cap perl(Proc::InvokeEditor))
poldek: There are 18 packages to install (17 marked by dependencies):
poldek: A perl-App-Nopaste-1.013-1.noarch  perl-B-Keywords-1.20-1.noarch
poldek: A perl-Class-Refresh-0.07-2.noarch  perl-Class-Unload-0.11-1.noarch
poldek: A perl-Clone-PP-1.07-1.noarch  perl-Config-INI-0.025-1.noarch
poldek: A perl-Config-INI-Reader-Ordered-0.020-1.noarch
poldek: A perl-Data-Printer-0.40-1.noarch
poldek: A perl-Getopt-Long-Descriptive-0.096-1.noarch
poldek: A perl-HTML-Form-6.07-1.noarch  perl-JSON-MaybeXS-1.004000-1.noarch
poldek: A perl-Mixin-Linewise-0.108-1.noarch
poldek: A perl-PerlIO-utf8_strict-0.007-2.x86_64
poldek: A perl-Proc-InvokeEditor-1.13-1.noarch  perl-Reply-0.42-1.noarch
poldek: A perl-Sort-Naturally-1.03-1.noarch  perl-Type-Tiny-1.006000-1.noarch
poldek: A perl-WWW-Mechanize-1.95-1.noarch
poldek: This operation will use 1.4MB of disk space.
poldek: Need to get 780.9KB of archives (747.2KB to download).
poldek: 
poldek: Retrieving [1/16] th::perl-Getopt-Long-Descriptive-0.096-1.noarch.rpm..............................done
poldek: Retrieving [2/16] th::perl-HTML-Form-6.07-1.noarch.rpm.....................................done
poldek: Retrieving [3/16] th::perl-WWW-Mechanize-1.95-1.noarch.rpm.................................done
poldek: Retrieving [4/16] th::perl-App-Nopaste-1.013-1.noarch.rpm..................................done
poldek: Retrieving [5/16] th::perl-B-Keywords-1.20-1.noarch.rpm....................................done
poldek: Retrieving [6/16] th::perl-Class-Unload-0.11-1.noarch.rpm..................................done
poldek: Retrieving [7/16] th::perl-Class-Refresh-0.07-2.noarch.rpm.................................done
poldek: Retrieving [8/16] th::perl-Clone-PP-1.07-1.noarch.rpm......................................done
poldek: Retrieving [9/16] th::perl-Mixin-Linewise-0.108-1.noarch.rpm...............................done
poldek: Retrieving [10/16] th::perl-Config-INI-0.025-1.noarch.rpm..................................done
poldek: Retrieving [11/16] th::perl-Config-INI-Reader-Ordered-0.020-1.noarch.rpm..............................done
poldek: Retrieving [12/16] th::perl-Data-Printer-0.40-1.noarch.rpm.................................done
poldek: Retrieving [13/16] th::perl-Proc-InvokeEditor-1.13-1.noarch.rpm..............................done
poldek: Retrieving [14/16] th::perl-Reply-0.42-1.noarch.rpm........................................done
poldek: Retrieving [15/16] th::perl-Type-Tiny-1.006000-1.noarch.rpm................................done
poldek: Retrieving [16/16] th::perl-PerlIO-utf8_strict-0.007-2.x86_64.rpm..............................done
poldek: Executing pm-command.sh --upgrade -vh --test --root / --define _check_dirname_deps 1...
poldek: Preparing...                ##################################################
no conflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	perl-Type-Tiny >= 1.008 is needed by perl-MooX-TypeTiny-0.002003-1.src
rpm: Building target platforms: x86_64-pld-linux
installing BR: perl\-Type\-Tiny
+ poldek --noask --caplookup -Q -v '--ignore=hhvm-*' '--ignore=php4-*' '--ignore=php52-*' '--ignore=php54-*' '--ignore=php55-*' '--ignore=php56-*' '--ignore=php70-*' '--ignore=php71-*' '--ignore=php72-*' '--ignore=php73-*' '--ignore=php74-*' --upgrade perl-Type-Tiny
Loading [pndir]ready...
Loading [pndir]th-test...
Loading [pndir]th-test...
Loading [pndir]th-ready...
Loading [pndir]th-ready...
Loading [pndir]th...
Loading [pndir]th...
30827 packages read
Removed 2351 duplicate packages from available set
Processing dependencies...
perl-Type-Tiny-1.006000-1.noarch marks perl-Reply-0.42-1.noarch (cap /usr/share/perl5/vendor_perl/Reply/Plugin)
 perl-Reply-0.42-1.noarch marks perl-App-Nopaste-1.013-1.noarch (cap perl(App::Nopaste))
  perl-App-Nopaste-1.013-1.noarch marks perl-Getopt-Long-Descriptive-0.096-1.noarch (cap perl(Getopt::Long::Descriptive))
  perl-App-Nopaste-1.013-1.noarch marks perl-JSON-MaybeXS-1.004000-1.noarch (cap perl(JSON::MaybeXS))
  perl-App-Nopaste-1.013-1.noarch marks perl-WWW-Mechanize-1.95-1.noarch (cap perl(WWW::Mechanize))
   perl-WWW-Mechanize-1.95-1.noarch marks perl-HTML-Form-6.07-1.noarch (cap perl(HTML::Form) >= 1.00)
 perl-Reply-0.42-1.noarch marks perl-B-Keywords-1.20-1.noarch (cap perl(B::Keywords))
 perl-Reply-0.42-1.noarch marks perl-Class-Refresh-0.07-2.noarch (cap perl(Class::Refresh) >= 0.05)
  perl-Class-Refresh-0.07-2.noarch marks perl-Class-Unload-0.11-1.noarch (cap perl(Class::Unload))
 perl-Reply-0.42-1.noarch marks perl-Config-INI-Reader-Ordered-0.020-1.noarch (cap perl(Config::INI::Reader::Ordered))
  perl-Config-INI-Reader-Ordered-0.020-1.noarch marks perl-Config-INI-0.025-1.noarch (cap /usr/share/perl5/vendor_perl/Config/INI)
   perl-Config-INI-0.025-1.noarch marks perl-Mixin-Linewise-0.108-1.noarch (cap perl(Mixin::Linewise::Readers) >= 0.105)
    perl-Mixin-Linewise-0.108-1.noarch marks perl-PerlIO-utf8_strict-0.007-2.x86_64 (cap perl(PerlIO::utf8_strict))
 perl-Reply-0.42-1.noarch marks perl-Data-Printer-0.40-1.noarch (cap perl(Data::Printer))
  perl-Data-Printer-0.40-1.noarch marks perl-Clone-PP-1.07-1.noarch (cap perl(Clone::PP))
  perl-Data-Printer-0.40-1.noarch marks perl-Sort-Naturally-1.03-1.noarch (cap perl(Sort::Naturally))
 perl-Reply-0.42-1.noarch marks perl-Proc-InvokeEditor-1.13-1.noarch (cap perl(Proc::InvokeEditor))
There are 18 packages to install (17 marked by dependencies):
A perl-App-Nopaste-1.013-1.noarch  perl-B-Keywords-1.20-1.noarch  
A perl-Class-Refresh-0.07-2.noarch  perl-Class-Unload-0.11-1.noarch  
A perl-Clone-PP-1.07-1.noarch  perl-Config-INI-0.025-1.noarch  
A perl-Config-INI-Reader-Ordered-0.020-1.noarch  
A perl-Data-Printer-0.40-1.noarch  
A perl-Getopt-Long-Descriptive-0.096-1.noarch  
A perl-HTML-Form-6.07-1.noarch  perl-JSON-MaybeXS-1.004000-1.noarch  
A perl-Mixin-Linewise-0.108-1.noarch  
A perl-PerlIO-utf8_strict-0.007-2.x86_64  
A perl-Proc-InvokeEditor-1.13-1.noarch  perl-Reply-0.42-1.noarch  
A perl-Sort-Naturally-1.03-1.noarch  perl-Type-Tiny-1.006000-1.noarch  
A perl-WWW-Mechanize-1.95-1.noarch
This operation will use 1.4MB of disk space.
Need to get 780.9KB of archives. 
Executing pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1...
Preparing...                ##################################################
perl-PerlIO-utf8_strict     ##################################################
perl-Proc-InvokeEditor      ##################################################
perl-Sort-Naturally         ##################################################
perl-Clone-PP               ##################################################
perl-Class-Unload           ##################################################
perl-B-Keywords             ##################################################
perl-HTML-Form              ##################################################
perl-JSON-MaybeXS           ##################################################
perl-Getopt-Long-Descriptive##################################################
perl-Mixin-Linewise         ##################################################
perl-Data-Printer           ##################################################
perl-Class-Refresh          ##################################################
perl-WWW-Mechanize          ##################################################
perl-Config-INI             ##################################################
perl-App-Nopaste            ##################################################
perl-Config-INI-Reader-Order##################################################
perl-Reply                  ##################################################
perl-Type-Tiny              ##################################################
building RPM using: set -ex; : build-id: B938190A-DE4A-4240-BF2C-2A328BD61D0D; TMPDIR=/tmp/B.dFNpXf/BUILD/tmp exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j9' --define '_make_opts -Otarget' --define '_pld_builder 1' --define '_topdir /tmp/B.dFNpXf' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD'  --target x86_64-pld-linux /tmp/B.dFNpXf/perl-MooX-TypeTiny.spec
+ : build-id: B938190A-DE4A-4240-BF2C-2A328BD61D0D
+ TMPDIR=/tmp/B.dFNpXf/BUILD/tmp
+ exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j9' --define '_make_opts -Otarget' --define '_pld_builder 1' --define '_topdir /tmp/B.dFNpXf' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-pld-linux /tmp/B.dFNpXf/perl-MooX-TypeTiny.spec
Building target platforms: x86_64-pld-linux
Executing(%prep): /bin/sh -e /tmp/B.dFNpXf/BUILD/tmp/rpm-tmp.6567
+ umask 022
+ cd /tmp/B.dFNpXf/BUILD
+ cd /tmp/B.dFNpXf/BUILD
+ rm -rf MooX-TypeTiny-0.002003
+ /bin/gzip -dc /tmp/B.dFNpXf/MooX-TypeTiny-0.002003.tar.gz
+ /bin/tar -xf -
+ STATUS=0 
+ '[' 0 -ne 0 ']'
+ cd MooX-TypeTiny-0.002003
+ /bin/id -u
+ '[' 1000 '=' 0 ']'
+ /bin/id -u
+ '[' 1000 '=' 0 ']'
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /tmp/B.dFNpXf/BUILD/tmp/rpm-tmp.6567
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/home/users/builder/GNUstep/Tools:/bin:/usr/bin:/usr/local/bin:/home/users/builder/bin
TMPDIR=/tmp/B.dFNpXf/BUILD/tmp
+ umask 022
+ cd /tmp/B.dFNpXf/BUILD
+ cd MooX-TypeTiny-0.002003
+ /usr/bin/perl Makefile.PL 'INSTALLDIRS=vendor'
Warning: prerequisite Moo 2.004 not found. We have 2.003006.
Warning: prerequisite Type::Tiny 1.008 not found. We have 1.006000.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for MooX::TypeTiny
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -Otarget -j9
cp lib/MooX/TypeTiny.pm blib/lib/MooX/TypeTiny.pm
cp lib/MooX/TypeTiny/Role/GenerateAccessor.pm blib/lib/MooX/TypeTiny/Role/GenerateAccessor.pm
Manifying 1 pod document
+ /usr/bin/make -Otarget -j9 test
PERL_DL_NONLAZY=1 "/usr/bin/perl5.30.3" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
BEGIN failed--compilation aborted at t/basic.t line 17.
t/basic.t ......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 

#   Failed test 'no c3 conflicts for attributes with lazy+coerce'
#   at t/c3-conflict.t line 25.
#          got: 'Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
# BEGIN failed--compilation aborted at (eval 62) line 4.
# '
#     expected: undef
# Looks like you failed 1 test of 1.
t/c3-conflict.t ... 
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
BEGIN failed--compilation aborted at t/clean.t line 8.
t/clean.t ......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 
Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
BEGIN failed--compilation aborted at t/default-once.t line 11.
t/default-once.t .. 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 
Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
BEGIN failed--compilation aborted at t/nested.t line 10.
t/nested.t ........ 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 
Can't locate object method "is_class" via package "Moo" at /tmp/B.dFNpXf/BUILD/MooX-TypeTiny-0.002003/blib/lib/MooX/TypeTiny.pm line 14.
BEGIN failed--compilation aborted at t/noninline.t line 17.
t/noninline.t ..... 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 

Test Summary Report
-------------------
t/basic.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/c3-conflict.t (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/clean.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/default-once.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/nested.t      (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/noninline.t   (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
Files=6, Tests=1,  1 wallclock secs ( 0.02 usr  0.02 sys +  0.80 cusr  0.08 csys =  0.92 CPU)
Result: FAIL
Failed 6/6 test programs. 1/1 subtests failed.
make: *** [Makefile:849: test_dynamic] Error 255
error: Bad exit status from /tmp/B.dFNpXf/BUILD/tmp/rpm-tmp.6567 (%build)


RPM build errors:
    Bad exit status from /tmp/B.dFNpXf/BUILD/tmp/rpm-tmp.6567 (%build)
ended at: Tue Jul 21 10:47:38 2020, done in 0:00:01.901372
error: No files produced.
+ chmod -R u+rwX /tmp/B.dFNpXf/BUILD
+ rm -rf /tmp/B.dFNpXf/tmp /tmp/B.dFNpXf/BUILD
+ rm -rf /tmp/B.dFNpXf
Begin-PLD-Builder-Info
Build-Time: user:10.58s sys:1.76s real:21.36s (faults io:0 non-io:509925)

End-PLD-Builder-Info