Powered by sqlite3. Your IP: 44.192.115.114 | autoconf a6c33bdf-bdcb-4130-a6d2-de2079cb3068Toc:- prep
Executing(%prep): /bin/sh -e /tmp/B.4a8aec/rpm-tmp.75816
- build
Executing(%build): /bin/sh -e /tmp/B.4a8aec/rpm-tmp.75816
- make check
+ /usr/bin/make -j1 check
- error 1
ERROR: 414 tests were run,
- error 2
make[3]: *** [check-local] Error 1
- error 3
make[2]: *** [check-am] Error 2
- error 4
make[1]: *** [check-recursive] Error 1
- error 5
error: Bad exit status from /tmp/B.4a8aec/rpm-tmp.75816 (%build)
- error 6
RPM build errors:
- error 7
error: No files produced.
Content:request from: glen
checking if we should skip the build
started at: Wed Aug 4 17:17:27 2010
fetching http://ep09.pld-linux.org/~buildsrc/srpms/a6c33bdf-bdcb-4130-a6d2-de2079cb3068/autoconf-2.64-4.src.rpm
fetched 1141629 bytes, 1154.0 K/s
installing srpm: autoconf-2.64-4.src.rpm
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
warning: group builder does not exist - using root
Building target platforms: athlon-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
no BR needed
building RPM using: echo build-id: a6c33bdf-bdcb-4130-a6d2-de2079cb3068; cd rpm/SPECS; TMPDIR=/tmp/B.4a8aec exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j1' --target athlon-pld-linux autoconf.spec
build-id: a6c33bdf-bdcb-4130-a6d2-de2079cb3068
Building target platforms: athlon-pld-linux
Executing(%prep): /bin/sh -e /tmp/B.4a8aec/rpm-tmp.75816
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd /home/users/builder/rpm/BUILD
+ rm -rf autoconf-2.64
+ /bin/mkdir -p autoconf-2.64
+ cd autoconf-2.64
+ /bin/id -u
+ [ 1001 = 0 ]
+ true .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ xz -dc /home/users/builder/rpm/SOURCES/autoconf-2.64.tar.xz
+ tar xf - -C ..
+ echo Patch #0 (autoconf-mawk.patch):
Patch #0 (autoconf-mawk.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/autoconf-mawk.patch
+ echo Patch #1 (autoconf-info.patch):
Patch #1 (autoconf-info.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/autoconf-info.patch
+ echo Patch #2 (autoconf-AC_EGREP.patch):
Patch #2 (autoconf-AC_EGREP.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/autoconf-AC_EGREP.patch
+ echo Patch #3 (autoconf-cxxcpp-warnonly.patch):
Patch #3 (autoconf-cxxcpp-warnonly.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/autoconf-cxxcpp-warnonly.patch
+ echo Patch #5 (autoconf-git.patch):
Patch #5 (autoconf-git.patch):
+ patch -p1 -s
+ < /home/users/builder/rpm/SOURCES/autoconf-git.patch
+ exit 0
Executing(%build): /bin/sh -e /tmp/B.4a8aec/rpm-tmp.75816
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd autoconf-2.64
+ ./configure LDFLAGS=-Wl,--as-needed CFLAGS=-O2 -march=athlon CXXFLAGS=-O2 -march=athlon FFLAGS=-O2 -march=athlon FCFLAGS=-O2 -march=athlon CPPFLAGS= CC=athlon-pld-linux-gcc CXX=athlon-pld-linux-g++ --host=noarch-pld-linux --build=noarch-pld-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/share --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --x-libraries=/usr/X11R6/lib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether /bin/sh -n is known to work... yes
checking for characters that cannot appear in file names... none
checking whether directories can have trailing spaces... yes
checking for expr... /usr/bin/expr
checking for GNU M4 that supports accurate traces... /usr/bin/m4
checking whether /usr/bin/m4 accepts --gnu... yes
checking how m4 supports trace files... --debugfile
checking for perl... /usr/bin/perl
checking for emacs... emacs
checking whether emacs is sufficiently recent... yes
checking for emacs... emacs
checking where .elc files should go... ${datarootdir}/emacs/site-lisp
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking whether make is case sensitive... yes
configure: creating ./config.status
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating man/Makefile
config.status: creating lib/emacs/Makefile
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating lib/Makefile
config.status: creating lib/Autom4te/Makefile
config.status: creating lib/autoscan/Makefile
config.status: creating lib/m4sugar/Makefile
config.status: creating lib/autoconf/Makefile
config.status: creating lib/autotest/Makefile
config.status: creating bin/Makefile
config.status: executing tests/atconfig commands
+ /usr/bin/make -j1 -j1
/usr/bin/make all-recursive
make[1]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
Making all in bin
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/bin'
rm -f autom4te autom4te.tmp
srcdir=''; \
test -f ./autom4te.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp
chmod +x autom4te.tmp
chmod a-w autom4te.tmp
mv autom4te.tmp autom4te
cd ../lib && /usr/bin/make autom4te.cfg
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
rm -f autom4te.cfg autom4te.tmp
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@AWK[@]|mawk|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp
chmod a-w autom4te.tmp
mv autom4te.tmp autom4te.cfg
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
cd ../lib/m4sugar && /usr/bin/make version.m4
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
:;{ \
echo '# This file is part of -*- Autoconf -*-.' && \
echo '# Version of Autoconf.' && \
echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \
echo '# Free Software Foundation, Inc.' && \
echo &&\
echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \
echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \
echo 'm4_define([m4_PACKAGE_VERSION], [2.64])' && \
echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.64])' && \
echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \
echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \
echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \
} > version.m4-t
mv version.m4-t version.m4
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in
rm -f autoconf autoconf.tmp
srcdir=''; \
test -f ./autoconf.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp
chmod +x autoconf.tmp
chmod a-w autoconf.tmp
mv autoconf.tmp autoconf
rm -f autoheader autoheader.tmp
srcdir=''; \
test -f ./autoheader.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp
chmod +x autoheader.tmp
chmod a-w autoheader.tmp
mv autoheader.tmp autoheader
rm -f autoreconf autoreconf.tmp
srcdir=''; \
test -f ./autoreconf.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp
chmod +x autoreconf.tmp
chmod a-w autoreconf.tmp
mv autoreconf.tmp autoreconf
rm -f ifnames ifnames.tmp
srcdir=''; \
test -f ./ifnames.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp
chmod +x ifnames.tmp
chmod a-w ifnames.tmp
mv ifnames.tmp ifnames
rm -f autoscan autoscan.tmp
srcdir=''; \
test -f ./autoscan.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp
chmod +x autoscan.tmp
chmod a-w autoscan.tmp
mv autoscan.tmp autoscan
rm -f autoupdate autoupdate.tmp
srcdir=''; \
test -f ./autoupdate.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|mawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.64|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp
chmod +x autoupdate.tmp
chmod a-w autoupdate.tmp
mv autoupdate.tmp autoupdate
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/bin'
Making all in .
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
/bin/sh /home/users/builder/rpm/BUILD/autoconf-2.64/build-aux/missing --run makeinfo --no-headers --no-validate --no-split --plaintext -o INSTALL \
./doc/install.texi
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
Making all in lib
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
Making all in Autom4te
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/Autom4te'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/Autom4te'
Making all in m4sugar
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=m4sugar \
--freeze \
--output=m4sugar.m4f
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=m4sh \
--freeze \
--output=m4sh.m4f
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
Making all in autoconf
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=autoconf \
--freeze \
--output=autoconf.m4f
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
Making all in autotest
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=autotest \
--freeze \
--output=autotest.m4f
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
Making all in autoscan
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoscan'
echo '# Automatically Generated: do not edit this file' >autoscan.list
sed '/^[#]/!q' ./autoscan.pre >>autoscan.list
( \
sed -n '/^[^#]/p' ./autoscan.pre; \
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \
) | LC_ALL=C sort >>autoscan.list
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoscan'
Making all in emacs
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs'
WARNING: Warnings can be ignored. :-)
if test "emacs" != no; then \
set x; \
list='autoconf-mode.el autotest-mode.el'; for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
set x "$@" "$d$p"; shift; \
done; \
shift; \
EMACS="emacs" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \
else : ; fi
While compiling autoconf-mode in file /home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs/elc.564/autoconf-mode.el:
** assignment to free variable add-log-current-defun-function
Wrote /home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs/elc.564/autoconf-mode.elc
While compiling autotest-mode in file /home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs/elc.564/autotest-mode.el:
** assignment to free variable add-log-current-defun-function
Wrote /home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs/elc.564/autotest-mode.elc
Done
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs'
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
Making all in doc
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/doc'
Updating ./version.texi
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/sh /home/users/builder/rpm/BUILD/autoconf-2.64/build-aux/missing --run makeinfo --version) >/dev/null 2>&1; then \
for f in autoconf.info autoconf.info-[0-9] autoconf.info-[0-9][0-9] autoconf.i[0-9] autoconf.i[0-9][0-9]; do \
if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/sh /home/users/builder/rpm/BUILD/autoconf-2.64/build-aux/missing --run makeinfo --no-split -I . \
-o autoconf.info autoconf.texi; \
then \
rc=0; \
CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
rc=$?; \
CDPATH="${ZSH_VERSION+.}:" && cd . && \
$restore $backupdir/* `echo "./autoconf.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
restore=: && backupdir=".am$$" && \
am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \
rm -rf $backupdir && mkdir $backupdir && \
if (/bin/sh /home/users/builder/rpm/BUILD/autoconf-2.64/build-aux/missing --run makeinfo --version) >/dev/null 2>&1; then \
for f in standards.info standards.info-[0-9] standards.info-[0-9][0-9] standards.i[0-9] standards.i[0-9][0-9]; do \
if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$am__cwd"; \
if /bin/sh /home/users/builder/rpm/BUILD/autoconf-2.64/build-aux/missing --run makeinfo --no-split -I . \
-o standards.info standards.texi; \
then \
rc=0; \
CDPATH="${ZSH_VERSION+.}:" && cd .; \
else \
rc=$?; \
CDPATH="${ZSH_VERSION+.}:" && cd . && \
$restore $backupdir/* `echo "./standards.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/doc'
Making all in tests
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in
rm -f autoconf autoconf.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp
chmod +x autoconf.tmp
chmod a-w autoconf.tmp
mv -f autoconf.tmp autoconf
rm -f autoheader autoheader.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp
chmod +x autoheader.tmp
chmod a-w autoheader.tmp
mv -f autoheader.tmp autoheader
rm -f autom4te autom4te.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp
chmod +x autom4te.tmp
chmod a-w autom4te.tmp
mv -f autom4te.tmp autom4te
rm -f autoreconf autoreconf.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp
chmod +x autoreconf.tmp
chmod a-w autoreconf.tmp
mv -f autoreconf.tmp autoreconf
rm -f autoscan autoscan.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp
chmod +x autoscan.tmp
chmod a-w autoscan.tmp
mv -f autoscan.tmp autoscan
rm -f autoupdate autoupdate.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp
chmod +x autoupdate.tmp
chmod a-w autoupdate.tmp
mv -f autoupdate.tmp autoupdate
rm -f ifnames ifnames.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e 's|@abs_top_builddir[@]|/home/users/builder/rpm/BUILD/autoconf-2.64|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp
chmod +x ifnames.tmp
chmod a-w ifnames.tmp
mv -f ifnames.tmp ifnames
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
Making all in man
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/man'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/man'
make[1]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
+ /usr/bin/make -j1 check
/usr/bin/make check-recursive
make[1]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
Making check in bin
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/bin'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/bin'
Making check in .
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
make[2]: Nothing to be done for `check-am'.
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
Making check in lib
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
Making check in Autom4te
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/Autom4te'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/Autom4te'
Making check in m4sugar
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
/usr/bin/make check-local
make[4]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
make[4]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/m4sugar'
Making check in autoconf
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
/usr/bin/make check-local
make[4]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
make[4]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoconf'
Making check in autotest
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
/usr/bin/make check-local
make[4]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
make[4]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
Making check in autoscan
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoscan'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autoscan'
Making check in emacs
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/emacs'
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
make[3]: Nothing to be done for `check-am'.
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib'
Making check in doc
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/doc'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/doc'
Making check in tests
make[2]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
/usr/bin/make check-local
make[3]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME], [GNU Autoconf])' && \
echo 'm4_define([AT_PACKAGE_TARNAME], [autoconf])' && \
echo 'm4_define([AT_PACKAGE_VERSION], [2.64])' && \
echo 'm4_define([AT_PACKAGE_STRING], [GNU Autoconf 2.64])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \
echo 'm4_define([AT_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])'; \
} > package.m4-t
mv package.m4-t package.m4
cd . && ./mktests.sh \
`echo " "../lib/autoconf/general.m4 ../lib/autoconf/status.m4 ../lib/autoconf/autoheader.m4 ../lib/autoconf/autoupdate.m4 ../lib/autoconf/specific.m4 ../lib/autoconf/functions.m4 ../lib/autoconf/lang.m4 ../lib/autoconf/c.m4 ../lib/autoconf/fortran.m4 ../lib/autoconf/headers.m4 ../lib/autoconf/libs.m4 ../lib/autoconf/types.m4 ../lib/autoconf/programs.m4 | sed 's, [^ ]*/, ../lib/autoconf/,g'`
cd ../lib/autotest && /usr/bin/make autotest.m4f
make[4]: Entering directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
make[4]: `autotest.m4f' is up to date.
make[4]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/lib/autotest'
autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=autotest -I . -I . suite.at -o testsuite.tmp
mv testsuite.tmp testsuite
/bin/sh ./testsuite
## ----------------------------- ##
## GNU Autoconf 2.64 test suite. ##
## ----------------------------- ##
Executables (autoheader, autoupdate...).
1: Syntax of the shell scripts ok
2: Syntax of the Perl scripts ok
3: autom4te cache ok
4: autom4te --force ok
5: autom4te and whitespace in file names ok
6: autom4te --trace and unusual macro names ok
7: autom4te --trace and whitespace ok
8: autoconf --trace: user macros ok
9: autoconf --trace: builtins ok
10: autoconf: forbidden tokens, basic ok
11: autoconf: forbidden tokens, exceptions ok
12: autoconf: automatically allowed tokens ok
13: autoconf: the empty token ok
14: autoconf: subdirectories ok
15: autoconf: input from stdin ok
16: autoconf: AC_AUTOCONF_VERSION ok
17: ifnames ok
18: autoheader ok
19: autoheader and macros ok
20: autoupdate ok
21: autoupdating AC_LINK_FILES ok
22: autoupdating AC_PREREQ ok
23: autoupdating AU_ALIAS ok
24: autoupdating OLD to NEW ok
25: autoupdating AC_HELP_STRING ok
26: autoupdating with m4sugar ok
27: autoupdating AC_LANG_SAVE ok
28: autoupdating AC_FOREACH ok
29: autoupdating with aclocal and m4_include ok
30: autom4te preselections ok
31: autom4te cache locking ok
32: autotools and whitespace in file names ok
M4sugar.
33: m4_stack ok
34: m4_defn ok
35: m4_dumpdef ok
36: m4_warn ok
37: m4_divert_stack ok
38: m4_expansion_stack ok
39: m4_require: error message ok
40: m4_require: circular dependencies ok
41: m4_require: one-shot initialization ok
42: m4_require: nested ok
43: m4sugar shorthand conditionals ok
44: m4_cond ok
45: m4 lists ok
46: m4_split ok
47: m4_do ok
48: m4_append ok
49: m4_join ok
50: m4_expand ok
51: m4_text_wrap ok
52: m4_version_compare ok
53: Standard regular expressions ok
54: m4_bmatch ok
55: m4_bpatsubsts ok
56: m4_esyscmd_s ok
57: M4 loops ok
58: m4_map ok
59: m4_map_args and m4_curry ok
60: m4_combine ok
61: m4_max and m4_min ok
62: recursion ok
63: m4_set ok
M4sh.
64: LINENO ok
65: LINENO stack ok
66: AS_BASENAME ok
67: AS_DIRNAME ok
68: AS_ECHO and AS_ECHO_N ok
69: AS_EXIT ok
70: AS_MKDIR_P ok
71: AS_VERSION_COMPARE ok
72: as_me ok
73: Negated classes in globbing ok
74: Functions Support ok
75: Functions and return Support ok
76: Nested AS_REQUIRE_SHELL_FN ok
77: Nested AS_REQUIRE ok
78: AS_REQUIRE_SHELL_FN and m4_require ok
79: AS_HELP_STRING ok
80: AS_IF and AS_CASE ok
81: AS_FOR ok
82: AS_LITERAL_IF ok
83: AS_VAR basics ok
84: AS_VAR_APPEND ok
85: AS_VAR_ARITH ok
86: AS_INIT cleanup ok
87: AS_INIT_GENERATED ok
88: AS_MESSAGE_FD ok
89: _AS_CLEAN_DIR ok
90: ECHO_C ok
Autotest.
91: Empty test suite ok
92: Banner-only test suite ok
93: Empty test ok
94: Empty check ok
95: AT_SETUP without AT_INIT ok
96: AT_BANNER without AT_INIT ok
97: AT_CLEANUP without AT_INIT ok
98: Missing AT_CLEANUP ok
99: AT_FAIL_IF without AT_SETUP ok
100: AT_SKIP_IF without AT_SETUP ok
101: AT_CHECK without AT_SETUP ok
102: AT_DATA without AT_SETUP ok
103: AT_XFAIL_IF without AT_SETUP ok
104: AT_KEYWORDS without AT_SETUP ok
105: AT_CLEANUP without AT_SETUP ok
106: AT_BANNER inside AT_SETUP ok
107: AT_SETUP inside AT_SETUP ok
108: Multiple AT_INIT ok
109: Tested programs ok
110: Startup error messages ok
111: Truth ok
112: Fallacy ok
113: Skip ok
114: Hard fail ok
115: AT_FAIL_IF ok
116: AT_SKIP_IF ok
117: Syntax error ok
118: errexit ok
119: unquoted output ok
120: Logging ok
121: Binary output ok
122: Cleanup ok
123: Literal multiline command ok
124: Multiline parameter expansion ok
125: Backquote command substitution ok
126: Multiline backquote command substitution ok
127: Parenthetical command substitution ok
128: Multiline parenthetical command substitution ok
129: Shell comment in command ok
130: Invalid brace-enclosed parameter expansion ok
131: Multiline command from M4 expansion ok
132: Double-M4-quoted command ok
133: Metacharacters in command from M4 expansion ok
134: BS-newline in command ok
135: ^BS-newline in command ok
136: BSx641-newline in command ok
137: BS-BS-newline in command ok
138: BSx640-newline in command ok
139: Newline-CODE-BS-newline in command ok
140: Single-quote-BS-newline in command ok
141: Single-quote-newline-BS-newline in command ok
142: Input from stdin ok
143: Backquote in a test title ok
144: Single-quote in a test title ok
145: Double-quote in a test title ok
146: Backslash in a test title ok
147: Brackets in a test title ok
148: Left bracket in a test title ok
149: Right bracket in a test title ok
150: Quoted pound in a test title ok
151: Pound in a test title ok
152: Quoted comma in a test title ok
153: Comma in a test title ok
154: Parentheses in a test title ok
155: Left paren in a test title ok
156: Right paren in a test title ok
157: Quoted Macro in a test title ok
158: Macro in a test title ok
159: Macro with backquote in a test title ok
160: Macro with single-quote in a test title ok
161: Macro with double-quote in a test title ok
162: Macro with backslash in a test title ok
163: Macro echoing macro in a test title ok
164: Macro echoing single-quote in a test title ok
165: Long test title in a test title ok
166: Longer test title in a test title ok
167: Long test source lines ok
168: Debugging a successful test ok
169: Debugging script and environment ok
170: Debugging a failed test ok
171: Using atlocal ok
172: Choosing where testsuite is run ok
173: Banners ok
174: Keywords and ranges ok
175: Keyword wrapping ok
176: parallel test execution skipped (autotest.at:1115)
177: parallel truth skipped (autotest.at:1147)
178: parallel fallacy skipped (autotest.at:1152)
179: parallel skip skipped (autotest.at:1157)
180: parallel syntax error skipped (autotest.at:1162)
181: parallel errexit skipped (autotest.at:1181)
182: parallel autotest and signal handling skipped (autotest.at:1199)
183: srcdir propagation ok
184: whitespace in absolute testdir ok
185: unusual file names ok
Autoconf base layer.
186: AC_REQUIRE: topological sort ok
187: AC_REQUIRE: error message ok
188: AC_REQUIRE & AC_DEFUN_ONCE: Require, expand ok
189: AC_REQUIRE & AC_DEFUN_ONCE: Expand, require ok
190: AC_REQUIRE & AC_PROVIDE ok
191: AC_CACHE_CHECK ok
192: AC_COMPUTE_INT ok
193: AC_TRY_COMMAND ok
194: Input/Output ok
195: configure arguments ok
196: configure directories ok
Testing config.status.
197: AC_CONFIG_COMMANDS with empty commands ok
198: Multiple AC_CONFIG_FILES ok
199: Parameterized AC_CONFIG_FILES ok
200: AC_ARG_VAR ok
201: AC_CONFIG_FILES, HEADERS, LINKS and COMMANDS ok
202: Macro calls in AC_CONFIG_COMMANDS tags ok
203: Missing templates ok
204: configure invocation ok
205: #define header templates ok
206: Torturing config.status ok
207: Substitute a 2000-byte string ok
208: Define to a 2000-byte string ok
209: Substitute and define special characters FAILED (torture.at:875)
210: Substitute a newline ok
211: Define a newline ok
212: AC_SUBST: variable name validation ok
213: datarootdir workaround ok
214: srcdir ok
215: Signal handling ok
216: AC_CONFIG_LINKS and identical files ok
autoreconf.
217: Configuring subdirectories ok
218: Deep Package ok
219: Non-Autoconf AC_CONFIG_SUBDIRS ok
220: Empty directory ok
221: Unusual Automake input files ok
Low level compiling/preprocessing macros.
222: AC_LANG, AC_LANG_PUSH & AC_LANG_POP ok
223: AC_REQUIRE & AC_LANG ok
224: AC_RUN_IFELSE ok
225: Order of user actions and cleanup ok
226: AC_TRY_LINK_FUNC ok
227: Multiple languages ok
Testing autoconf/lang macros.
228: AC_NO_EXECUTABLES ok
229: AC_REQUIRE_CPP ok
C low level compiling/preprocessing macros.
230: Extensions ok
231: Broken/missing compilers ok
232: C keywords ok
233: AC_PROG_CPP requires AC_PROG_CC ok
234: AC_PROG_CPP with warnings ok
235: AC_PROG_CPP without warnings ok
236: AC_PROG_CPP via CC ok
237: AC_NO_EXECUTABLES (working linker) ok
238: AC_NO_EXECUTABLES (broken linker) ok
239: AC_USE_SYSTEM_EXTENSIONS ok
240: AC_C_RESTRICT and C++ ok
Testing autoconf/c macros.
241: AC_C_BACKSLASH_A ok
242: AC_C_BIGENDIAN ok
243: AC_C_CHAR_UNSIGNED ok
244: AC_C_FLEXIBLE_ARRAY_MEMBER ok
245: AC_C_INLINE ok
246: AC_C_PROTOTYPES ok
247: AC_C_RESTRICT ok
248: AC_C_STRINGIZE ok
249: AC_C_TYPEOF ok
250: AC_C_VARARRAYS ok
251: AC_OPENMP ok
252: AC_PROG_CC_C89 ok
253: AC_PROG_CC_C99 ok
254: AC_PROG_CC_C_O ok
255: AC_PROG_CC_STDC ok
256: AC_PROG_CPP_WERROR ok
257: AC_PROG_GCC_TRADITIONAL ok
258: AC_LANG_C ok
259: AC_LANG_CPLUSPLUS ok
260: AC_LANG_OBJC ok
Fortran low level compiling/preprocessing macros.
261: GNU Fortran 77 ok
262: GNU Fortran ok
Testing autoconf/fortran macros.
263: AC_F77_MAIN ok
264: AC_F77_WRAPPERS ok
265: AC_FC_MAIN ok
266: AC_FC_WRAPPERS ok
267: AC_PROG_F77_C_O ok
268: AC_PROG_FC_C_O ok
269: AC_F77_NAME_MANGLING ok
270: AC_LANG_FORTRAN77 ok
Erlang low level compiling and utility macros.
271: Erlang skipped (erlang.at:32)
272: AC_ERLANG_CHECK_LIB skipped (erlang.at:54)
273: AC_ERLANG_SUBST_ROOT_DIR skipped (erlang.at:74)
274: AC_ERLANG_SUBST_LIB_DIR skipped (erlang.at:91)
275: AC_ERLANG_SUBST_INSTALL_LIB_DIR ok
276: AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR ok
277: AC_ERLANG_SUBST_ERTS_VER skipped (erlang.at:130)
Semantics.
278: AC_CHECK_LIB ok
279: AC_SEARCH_LIBS ok
280: AC_SEARCH_LIBS (none needed) ok
281: AC_CHECK_DECLS ok
282: AC_CHECK_FUNCS ok
283: AC_REPLACE_FUNCS ok
284: AC_CHECK_HEADERS ok
285: AC_CHECK_HEADERS (preprocessor test) ok
286: AC_CHECK_HEADERS (compiler test) ok
287: AC_CHECK_MEMBERS ok
288: AC_CHECK_ALIGNOF ok
289: AC_CHECK_ALIGNOF (cross compile) ok
290: AC_CHECK_ALIGNOF struct ok
291: AC_CHECK_ALIGNOF struct (cross compile) ok
292: AC_CHECK_SIZEOF ok
293: AC_CHECK_SIZEOF (cross compile) ok
294: AC_CHECK_SIZEOF struct ok
295: AC_CHECK_SIZEOF struct (cross compile) ok
296: AC_CHECK_TYPES ok
297: AC_CHECK_TYPES: backward compatibility ok
298: AC_CHECK_FILES ok
299: AC_CHECK_PROG & AC_CHECK_PROGS ok
300: AC_C_BIGENDIAN ok
301: AC_PATH_PROG & AC_PATH_PROGS ok
302: AC_PATH_PROGS_FEATURE_CHECK ok
303: AC_PATH_XTRA ok
304: AC_SYS_RESTARTABLE_SYSCALLS ok
305: AC_FUNC_SETVBUF_REVERSED ok
306: AC_FUNC_WAIT3 ok
Testing autoconf/general macros.
307: AC_ARG_ENABLE ok
308: AC_ARG_PROGRAM ok
309: AC_ARG_WITH ok
310: AC_CHECK_DECLS_ONCE ok
311: AC_EGREP_CPP ok
312: AC_EGREP_HEADER ok
313: AC_LIBOBJ ok
314: AC_LIBSOURCES ok
315: AC_PREFIX_DEFAULT ok
316: AC_PRESERVE_HELP_ORDER ok
317: AC_CHECKING ok
318: AC_COMPILE_CHECK ok
319: AC_ENABLE ok
320: AC_FOREACH ok
321: AC_MSG_RESULT_UNQUOTED ok
322: AC_TRY_COMPILE ok
323: AC_TRY_CPP ok
324: AC_TRY_LINK ok
325: AC_TRY_RUN ok
326: AC_VALIDATE_CACHED_SYSTEM_TUPLE ok
327: AC_WITH ok
Testing autoconf/status macros.
328: AC_OUTPUT_COMMANDS ok
Testing autoconf/specific macros.
329: AC_SYS_INTERPRETER ok
330: AC_SYS_LARGEFILE ok
331: AC_SYS_LONG_FILE_NAMES ok
332: AC_SYS_POSIX_TERMIOS ok
333: AC_AIX ok
334: AC_ARG_ARRAY ok
335: AC_DECL_SYS_SIGLIST ok
336: AC_DYNIX_SEQ ok
337: AC_HAVE_POUNDBANG ok
338: AC_IRIX_SUN ok
339: AC_ISC_POSIX ok
340: AC_MINIX ok
341: AC_SCO_INTL ok
342: AC_XENIX_DIR ok
Testing autoconf/programs macros.
343: AC_PROG_AWK ok
344: AC_PROG_FGREP ok
345: AC_PROG_INSTALL ok
346: AC_PROG_LEX ok
347: AC_PROG_LN_S ok
348: AC_PROG_MAKE_SET ok
349: AC_PROG_MKDIR_P ok
350: AC_PROG_RANLIB ok
351: AC_PROG_SED ok
352: AC_PROG_YACC ok
353: AC_CHECK_TOOL_PREFIX ok
354: AC_DECL_YYTEXT ok
355: AC_RSH ok
Testing autoconf/headers macros.
356: AC_CHECK_HEADERS_ONCE ok
357: AC_HEADER_ASSERT ok
358: AC_HEADER_MAJOR ok
359: AC_HEADER_RESOLV ok
360: AC_HEADER_STAT ok
361: AC_HEADER_STDBOOL ok
362: AC_HEADER_TIOCGWINSZ ok
363: AC_DIR_HEADER ok
364: AC_MEMORY_H ok
365: AC_UNISTD_H ok
366: AC_USG ok
Testing autoconf/types macros.
367: AC_STRUCT_DIRENT_D_INO ok
368: AC_STRUCT_DIRENT_D_TYPE ok
369: AC_STRUCT_ST_BLOCKS ok
370: AC_STRUCT_TIMEZONE ok
371: AC_TYPE_INT16_T ok
372: AC_TYPE_INT32_T ok
373: AC_TYPE_INT64_T ok
374: AC_TYPE_INT8_T ok
375: AC_TYPE_INTMAX_T ok
376: AC_TYPE_INTPTR_T ok
377: AC_TYPE_LONG_DOUBLE ok
378: AC_TYPE_LONG_DOUBLE_WIDER ok
379: AC_TYPE_MODE_T ok
380: AC_TYPE_OFF_T ok
381: AC_TYPE_SSIZE_T ok
382: AC_TYPE_UINT16_T ok
383: AC_TYPE_UINT32_T ok
384: AC_TYPE_UINT64_T ok
385: AC_TYPE_UINT8_T ok
386: AC_TYPE_UINTMAX_T ok
387: AC_TYPE_UINTPTR_T ok
388: AC_C_LONG_DOUBLE ok
389: AC_INT_16_BITS ok
390: AC_LONG_64_BITS ok
391: AC_STRUCT_ST_BLKSIZE ok
392: AC_STRUCT_ST_RDEV ok
393: AC_TYPE_SIGNAL ok
394: AM_TYPE_PTRDIFF_T ok
Testing autoconf/functions macros.
395: AC_CHECK_FUNCS_ONCE ok
396: AC_FUNC_CHOWN ok
397: AC_FUNC_CLOSEDIR_VOID ok
398: AC_FUNC_ERROR_AT_LINE ok
399: AC_FUNC_FNMATCH ok
400: AC_FUNC_FORK ok
401: AC_FUNC_FSEEKO ok
402: AC_FUNC_GETGROUPS ok
403: AC_FUNC_GETMNTENT ok
404: AC_FUNC_GETPGRP ok
405: AC_FUNC_LSTAT ok
406: AC_FUNC_MALLOC ok
407: AC_FUNC_MBRTOWC ok
408: AC_FUNC_MEMCMP ok
409: AC_FUNC_MKTIME ok
410: AC_FUNC_MMAP ok
411: AC_FUNC_OBSTACK ok
412: AC_FUNC_REALLOC ok
413: AC_FUNC_SELECT_ARGTYPES ok
414: AC_FUNC_SETPGRP ok
415: AC_FUNC_STAT ok
416: AC_FUNC_STRCOLL ok
417: AC_FUNC_STRERROR_R ok
418: AC_FUNC_STRFTIME ok
419: AC_FUNC_STRNLEN ok
420: AC_FUNC_STRTOD ok
421: AC_FUNC_STRTOLD ok
422: AC_FUNC_UTIME_NULL ok
423: AC_FUNC_VPRINTF ok
Testing autoconf/libs macros.
424: AC_HAVE_LIBRARY ok
Compatibility with other tools.
425: Libtool ok
Autoscan.
426: autoscan ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: 414 tests were run,
1 failed unexpectedly.
12 tests were skipped.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <bug-autoconf@gnu.org>
Subject: [GNU Autoconf 2.64] testsuite: 209 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[3]: *** [check-local] Error 1
make[3]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
make[2]: *** [check-am] Error 2
make[2]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64/tests'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/home/users/builder/rpm/BUILD/autoconf-2.64'
make: *** [check] Error 2
error: Bad exit status from /tmp/B.4a8aec/rpm-tmp.75816 (%build)
RPM build errors:
Bad exit status from /tmp/B.4a8aec/rpm-tmp.75816 (%build)
ended at: Wed Aug 4 17:26:45 2010, done in 00h 09m 15s
error: No files produced.
Begin-PLD-Builder-Info
Build-Time: user:311.04s sys:61.37s real:557.96s (faults io:275 non-io:47258087)
End-PLD-Builder-Info
|
|
