screen d0e2d2b5-cd89-42e8-a796-4f554276e964

request from: glen
checking if we should skip the build
started at: Tue Dec  4 23:53:54 2018
fetching http://ep09.pld-linux.org/~buildsrc/srpms/d0e2d2b5-cd89-42e8-a796-4f554276e964/screen-4.0.3-7.src.rpm
fetched 939959 bytes, 1187.7 K/s
installing srpm: screen-4.0.3-7.src.rpm
+ install -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/RPMS
+ rpm -Uhv --nodeps --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' screen-4.0.3-7.src.rpm
warning: screen-4.0.3-7.src.rpm: Header V4 DSA signature: NOKEY, key ID 1086ca54
screen                      ##################################################
+ rm -f screen-4.0.3-7.src.rpm
+ install -m 700 -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp
+ TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp
+ exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i586-pld-linux --define 'prep exit 0' /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec
Building target platforms: i586-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: Building target platforms: i586-pld-linux
no BR needed
building RPM using: set -ex; : build-id: d0e2d2b5-cd89-42e8-a796-4f554276e964; TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_pld_builder 1' --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD'  --target i586-pld-linux /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec
+ : build-id: d0e2d2b5-cd89-42e8-a796-4f554276e964
+ TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp
+ exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_pld_builder 1' --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i586-pld-linux /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec
Building target platforms: i586-pld-linux
Executing(%prep): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp  /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.41016
+ umask 022
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ rm -rf screen-4.0.3
+ /bin/gzip -dc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-4.0.3.tar.gz
+ tar -xf -
+ STATUS=0
+ [ 0 -ne 0 ]
+ cd screen-4.0.3
+ /bin/id -u
+ [ 182 = 0 ]
+ true .
+ /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w .
+ echo Patch #0 (screen-tty.patch):
Patch #0 (screen-tty.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-tty.patch 
+ echo Patch #1 (screen-compat21.patch):
Patch #1 (screen-compat21.patch):
+ patch -p0 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-compat21.patch 
+ echo Patch #2 (screen-manual.patch):
Patch #2 (screen-manual.patch):
+ patch -p0 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-manual.patch 
+ echo Patch #3 (screen-ia64.patch):
Patch #3 (screen-ia64.patch):
+ patch -p0 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-ia64.patch 
+ echo Patch #4 (screen-info.patch):
Patch #4 (screen-info.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-info.patch 
+ echo Patch #5 (screen-debian_fixed.patch):
Patch #5 (screen-debian_fixed.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-debian_fixed.patch 
+ echo Patch #6 (screen-nolibtermcap.patch):
Patch #6 (screen-nolibtermcap.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-nolibtermcap.patch 
+ echo Patch #9 (screen-no-libs.patch):
Patch #9 (screen-no-libs.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-no-libs.patch 
+ echo Patch #10 (screen-varargs.patch):
Patch #10 (screen-varargs.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-varargs.patch 
+ echo Patch #11 (screen-inputline-size.patch):
Patch #11 (screen-inputline-size.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-inputline-size.patch 
+ echo Patch #12 (screen-screenrc.patch):
Patch #12 (screen-screenrc.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-screenrc.patch 
+ echo Patch #13 (screen-osc.patch):
Patch #13 (screen-osc.patch):
+ patch -p1 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-osc.patch 
+ echo Patch #14 (screen-comment.patch):
Patch #14 (screen-comment.patch):
+ patch -p0 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-comment.patch 
+ echo Patch #15 (screen-statusline-encoding.patch):
Patch #15 (screen-statusline-encoding.patch):
+ patch -p0 -s
+ < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-statusline-encoding.patch 
+ exit 0
Executing(%build): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp  /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.41016
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin
HOME=/home/services/builder
TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp
+ umask 022
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ cd screen-4.0.3
+ aclocal
configure.in:15: warning: underquoted definition of AC_PROGRAM_SOURCE
configure.in:15:   run info '(automake)Extending aclocal'
configure.in:15:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
+ autoconf
+ ./configure LDFLAGS=-Wl,--as-needed  CFLAGS=-O2 -march=i586  CXXFLAGS=-O2 -march=i586  FFLAGS=-O2 -march=i586  FCFLAGS=-O2 -march=i586  CPPFLAGS= CC=i586-pld-linux-gcc CXX=i586-pld-linux-g++ --host=i586-pld-linux --build=i586-pld-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --x-libraries=/usr/X11R6/lib --with-sys-screenrc=/etc/screenrc --enable-pam --enable-colors256 --enable-rxvt_osc --disable-socket-dir
this is screen version 4.0.3
checking for i586-pld-linux-gcc... i586-pld-linux-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i586-pld-linux-gcc accepts -g... yes
checking for i586-pld-linux-gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... i586-pld-linux-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether i586-pld-linux-gcc needs -traditional... no
checking for library containing strerror... none required
checking for mawk... mawk
checking for a BSD-compatible install... /usr/bin/install -c
configure: checking for buggy tools...
- sed is 'GNU sed version 4.1.5'.
checking if a system-wide socket dir should be used... no.  ~/.screen will be used instead.
configure: checking for MIPS...
configure: checking for Ultrix...
configure: checking for butterfly...
configure: checking for POSIX.1...
- you have a POSIX system
configure: checking for System V...
configure: checking for sequent/ptx...
configure: checking for Solaris 2.x...
configure: checking BSD job jontrol...
- you have jobcontrol
configure: checking setreuid...
configure: checking seteuid...
configure: checking select...
configure: checking fifos...
- your fifos are usable
configure: checking for broken fifo implementation...
- your implementation is ok
configure: checking sockets...
- your sockets are usable
configure: checking socket implementation...
- you are normal
- both sockets and fifos usable. let's take fifos.
configure: checking select return value...
- select is ok
configure: checking for tgetent...
configure: checking libcurses...
- you use the terminfo database
configure: checking ospeed...
configure: checking for /dev/ptc...
configure: checking for SVR4 ptys...
checking for getpt... yes
configure: checking for ptyranges...
configure: checking default tty permissions/group...
checking for write... /usr/bin/write
checking for xterm... no
- pty mode: 0620, group: 5
configure: checking getutent...
configure: checking ut_host...
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking utempter.h usability... yes
checking utempter.h presence... yes
checking for utempter.h... yes
configure: checking getloadavg...
assuming posix signal definition
configure: checking for crypt and sec libraries...
configure: checking crypt...
configure: checking IRIX sun library...
configure: checking syslog...
configure: checking wait union...
configure: checking for termio or termios...
configure: checking getspnam...
configure: checking getttyent...
configure: checking fdwalk...
configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
checking long file names... yes
checking for vsprintf... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for setenv... yes
checking for nl_langinfo(CODESET)... yes
checking for library containing gethostname... none required
checking for rename... yes
checking for fchmod... yes
checking for fchown... yes
checking for strerror... yes
checking for lstat... yes
checking for _exit... yes
checking for utimes... yes
checking for vsnprintf... yes
checking for getcwd... yes
checking for setlocale... yes
checking for strftime... yes
checking for PAM support... yes
checking for the global screenrc file... "/etc/screenrc"
checking for the utf8-encodings location... "/usr/share/screen/utf8encodings"
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: WARNING:  'doc/Makefile.in' seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: executing default commands

Now please check the pathnames in the Makefile and in the user
configuration section in config.h.
Then type 'make' to make screen. Good luck.

+ cp -f comm.h.dist comm.h
+ cp -f kmapdef.c.dist kmapdef.c
+ cp -f term.h.dist term.h
+ cp -f tty.c.dist tty.c
+ /usr/bin/make -j4 CFLAGS=-O2 -march=i586  -DMAXWIN=256
CPP="i586-pld-linux-gcc -E " srcdir=. sh ./osdef.sh
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 term.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 putenv.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 comm.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 kmapdef.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 screen.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 ansi.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 fileio.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 mark.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 misc.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 resize.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 socket.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 search.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 tty.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 window.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 utmp.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 loadav.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 help.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 termcap.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 input.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 attacher.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 pty.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 process.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 display.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 acls.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 braille.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 braille_tsi.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 logfile.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 layer.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 sched.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 teln.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 nethack.c
i586-pld-linux-gcc -c -I. -I.    -O2 -march=i586  -DMAXWIN=256 encoding.c
i586-pld-linux-gcc -Wl,--as-needed  -o screen screen.o ansi.o fileio.o mark.o misc.o resize.o socket.o search.o tty.o term.o window.o utmp.o loadav.o putenv.o help.o termcap.o input.o attacher.o pty.o process.o display.o comm.o kmapdef.o acls.o braille.o braille_tsi.o logfile.o layer.o sched.o teln.o nethack.o encoding.o -lcurses  -lutempter -lcrypt -lpam
+ cd doc
+ rm -f screen.info screen.info-1 screen.info-2 screen.info-3 screen.info-4 screen.info-5
+ makeinfo screen.texinfo
screen.texinfo:2890: warning: Accent command `@'' must not be followed by whitespace.
+ exit 0
Executing(%install): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp  /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.91379
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin
HOME=/home/services/builder
TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp
+ umask 022
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ /bin/rm --interactive=never -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
+ /bin/mkdir -p /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
+ cd screen-4.0.3
+ rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
+ install -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/bin /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/screen/utf8encodings /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/skel /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/pam.d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man//man1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/pl/man1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/info
+ install screen /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/bin
+ install doc/screen.1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/man1
+ install doc/screen.info /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/info
+ install etc/etcscreenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/screenrc
+ install /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/skel/.screenrc
+ install utf8encodings/01 utf8encodings/02 utf8encodings/03 utf8encodings/04 utf8encodings/18 utf8encodings/19 utf8encodings/a1 utf8encodings/bf utf8encodings/c2 utf8encodings/c3 utf8encodings/c4 utf8encodings/c6 utf8encodings/c7 utf8encodings/c8 utf8encodings/cc utf8encodings/cd utf8encodings/d6 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/screen/utf8encodings
+ bzip2 -dc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-non-english-man-pages.tar.bz2
+ tar xf - -C /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man
+ install /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.pamd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/pam.d/screen
+ rm -f /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/README.screen-non-english-man-pages
+ __spec_install_post_strip
Stripping 1 ELF executables...DONE
+ __spec_install_post_chrpath
Remove RPATH/RUNPATH from 1 executable binaries and shared object files.
+ __spec_install_post_check_so
Searching for shared objects with unresolved symbols... DONE
+ __spec_install_post_check_tmpfiles
Checking /var/run <-> tmpfiles.d completeness...
 DONE
+ __spec_install_post_compress_docs
Compress man pages: /usr/share/man
Compress info pages: /usr/share/info
+ __spec_install_post_compress_modules
+ __spec_install_post_py_hardlink
Processing files: screen-4.0.3-7
Executing(%doc): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp  /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.10903
+ umask 022
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ cd screen-4.0.3
+ DOCDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3
+ export DOCDIR
+ rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3
+ /bin/mkdir -p /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3...

Documentation compressed.
+ cp -pr NEWS README ChangeLog doc/FAQ doc/README.DOTSCREEN etc/screenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3...
./NEWS ./README ./ChangeLog ./FAQ ./README.DOTSCREEN ./screenrc 
Documentation compressed.
+ exit 0
Searching for required packages....
Provides: config(screen) = 0:4.0.3-7
Requires(interp): /sbin/postshell /sbin/postshell
Requires(post): /sbin/postshell
Requires(postun): /sbin/postshell
Requires: glibc libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libcrypt.so.1 libcrypt.so.1(GLIBC_2.0) libpam.so.0 libtinfo.so.5 libutempter libutempter.so.0 ncurses pam-libs
Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
warning: Could not canonicalize hostname: pldac-atlas
Wrote: /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/RPMS/screen-4.0.3-7.i586.rpm
Executing(%clean): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp  /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.29313
+ umask 022
+ cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ cd screen-4.0.3
+ /bin/rm --interactive=never -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
+ rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder
ended at: Tue Dec  4 23:54:25 2018, done in 0:00:28.956253
+ chmod -R u+rwX /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
+ rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/tmp /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD
copy rpm files to cache_dir: /var/cache/pld-builder/ready
Creating pndir index of /var/cache/pld-builder/ready/ (type=dir)...
Loading [dir]/var/cache/pld-builder/ready/...
Writing /var/cache/pld-builder/ready/packages.ndir.gz...
Begin-PLD-Builder-Info
upgrading packages
Preparing...                ##################################################
screen                      ##################################################
End-PLD-Builder-Info
+ rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330
Begin-PLD-Builder-Info
Build-Time: user:14.19s sys:1.12s real:39.37s (faults io:92 non-io:354202)

Files queued for ftp:
    671862 screen-4.0.3-7.i586.rpm
        72 screen-4.0.3-7.src.rpm.uploadinfo

End-PLD-Builder-Info