# src : https://buildlogs.pld-linux.org/pld/ac/i686/OK/screen,d0e2d2b5-cd89-42e8-a796-4f554276e964.bz2 # date : 2018/12/04 23:54:35 request from: glen checking if we should skip the build started at: Tue Dec 4 23:53:55 2018 fetching http://ep09.pld-linux.org/~buildsrc/srpms/d0e2d2b5-cd89-42e8-a796-4f554276e964/screen-4.0.3-7.src.rpm fetched 939959 bytes, 4987.0 K/s installing srpm: screen-4.0.3-7.src.rpm + install -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/RPMS + rpm -Uhv --nodeps --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' screen-4.0.3-7.src.rpm warning: screen-4.0.3-7.src.rpm: Header V4 DSA signature: NOKEY, key ID 1086ca54 screen ################################################## + rm -f screen-4.0.3-7.src.rpm + install -m 700 -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp + TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp + exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-pld-linux --define 'prep exit 0' /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec Building target platforms: i686-pld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: Building target platforms: i686-pld-linux no BR needed building RPM using: set -ex; : build-id: d0e2d2b5-cd89-42e8-a796-4f554276e964; TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_pld_builder 1' --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-pld-linux /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec + : build-id: d0e2d2b5-cd89-42e8-a796-4f554276e964 + TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp + exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_pld_builder 1' --define '_topdir /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-pld-linux /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.spec Building target platforms: i686-pld-linux Executing(%prep): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.41016 + umask 022 + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + rm -rf screen-4.0.3 + /bin/gzip -dc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-4.0.3.tar.gz + tar -xf - + STATUS=0 + [ 0 -ne 0 ] + cd screen-4.0.3 + /bin/id -u + [ 182 = 0 ] + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + echo Patch #0 (screen-tty.patch): Patch #0 (screen-tty.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-tty.patch + echo Patch #1 (screen-compat21.patch): Patch #1 (screen-compat21.patch): + patch -p0 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-compat21.patch + echo Patch #2 (screen-manual.patch): Patch #2 (screen-manual.patch): + patch -p0 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-manual.patch + echo Patch #3 (screen-ia64.patch): Patch #3 (screen-ia64.patch): + patch -p0 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-ia64.patch + echo Patch #4 (screen-info.patch): Patch #4 (screen-info.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-info.patch + echo Patch #5 (screen-debian_fixed.patch): Patch #5 (screen-debian_fixed.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-debian_fixed.patch + echo Patch #6 (screen-nolibtermcap.patch): Patch #6 (screen-nolibtermcap.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-nolibtermcap.patch + echo Patch #9 (screen-no-libs.patch): Patch #9 (screen-no-libs.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-no-libs.patch + echo Patch #10 (screen-varargs.patch): Patch #10 (screen-varargs.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-varargs.patch + echo Patch #11 (screen-inputline-size.patch): Patch #11 (screen-inputline-size.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-inputline-size.patch + echo Patch #12 (screen-screenrc.patch): Patch #12 (screen-screenrc.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-screenrc.patch + echo Patch #13 (screen-osc.patch): Patch #13 (screen-osc.patch): + patch -p1 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-osc.patch + echo Patch #14 (screen-comment.patch): Patch #14 (screen-comment.patch): + patch -p0 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-comment.patch + echo Patch #15 (screen-statusline-encoding.patch): Patch #15 (screen-statusline-encoding.patch): + patch -p0 -s + < /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-statusline-encoding.patch + exit 0 Executing(%build): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.94292 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp + umask 022 + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + cd screen-4.0.3 + aclocal configure.in:15: warning: underquoted definition of AC_PROGRAM_SOURCE configure.in:15: run info '(automake)Extending aclocal' configure.in:15: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal + autoconf + ./configure LDFLAGS=-Wl,--as-needed CFLAGS=-O2 -march=i686 CXXFLAGS=-O2 -march=i686 FFLAGS=-O2 -march=i686 FCFLAGS=-O2 -march=i686 CPPFLAGS= CC=i686-pld-linux-gcc CXX=i686-pld-linux-g++ --host=i686-pld-linux --build=i686-pld-linux --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --x-libraries=/usr/X11R6/lib --with-sys-screenrc=/etc/screenrc --enable-pam --enable-colors256 --enable-rxvt_osc --disable-socket-dir this is screen version 4.0.3 checking for i686-pld-linux-gcc... i686-pld-linux-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether i686-pld-linux-gcc accepts -g... yes checking for i686-pld-linux-gcc option to accept ISO C89... none needed checking how to run the C preprocessor... i686-pld-linux-gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether i686-pld-linux-gcc needs -traditional... no checking for library containing strerror... none required checking for mawk... mawk checking for a BSD-compatible install... /usr/bin/install -c configure: checking for buggy tools... - sed is 'GNU sed version 4.1.5'. checking if a system-wide socket dir should be used... no. ~/.screen will be used instead. configure: checking for MIPS... configure: checking for Ultrix... configure: checking for butterfly... configure: checking for POSIX.1... - you have a POSIX system configure: checking for System V... configure: checking for sequent/ptx... configure: checking for Solaris 2.x... configure: checking BSD job jontrol... - you have jobcontrol configure: checking setreuid... configure: checking seteuid... configure: checking select... configure: checking fifos... - your fifos are usable rm: cannot remove `/tmp/conftest.java': Operation not permitted configure: checking for broken fifo implementation... - your implementation is ok rm: cannot remove `/tmp/conftest.java': Operation not permitted configure: checking sockets... - your sockets are usable rm: cannot remove `/tmp/conftest.java': Operation not permitted configure: checking socket implementation... - you are normal rm: cannot remove `/tmp/conftest.java': Operation not permitted - both sockets and fifos usable. let's take fifos. configure: checking select return value... - select is ok configure: checking for tgetent... configure: checking libcurses... - you use the terminfo database configure: checking ospeed... configure: checking for /dev/ptc... configure: checking for SVR4 ptys... checking for getpt... yes configure: checking for ptyranges... configure: checking default tty permissions/group... checking for write... /usr/bin/write checking for xterm... no - pty mode: 0620, group: 5 configure: checking getutent... configure: checking ut_host... checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking utempter.h usability... yes checking utempter.h presence... yes checking for utempter.h... yes configure: checking getloadavg... assuming posix signal definition configure: checking for crypt and sec libraries... configure: checking crypt... configure: checking IRIX sun library... configure: checking syslog... configure: checking wait union... configure: checking for termio or termios... configure: checking getspnam... configure: checking getttyent... configure: checking fdwalk... configure: checking whether memcpy/memmove/bcopy handles overlapping arguments... checking long file names... yes rm: cannot remove `/tmp/conftest.java': Operation not permitted checking for vsprintf... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for setenv... yes checking for nl_langinfo(CODESET)... yes checking for library containing gethostname... none required checking for rename... yes checking for fchmod... yes checking for fchown... yes checking for strerror... yes checking for lstat... yes checking for _exit... yes checking for utimes... yes checking for vsnprintf... yes checking for getcwd... yes checking for setlocale... yes checking for strftime... yes checking for PAM support... yes checking for the global screenrc file... "/etc/screenrc" checking for the utf8-encodings location... "/usr/share/screen/utf8encodings" configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: WARNING: 'doc/Makefile.in' seems to ignore the --datarootdir setting config.status: creating config.h config.status: executing default commands Now please check the pathnames in the Makefile and in the user configuration section in config.h. Then type 'make' to make screen. Good luck. + cp -f comm.h.dist comm.h + cp -f kmapdef.c.dist kmapdef.c + cp -f term.h.dist term.h + cp -f tty.c.dist tty.c + /usr/bin/make -j4 CFLAGS=-O2 -march=i686 -DMAXWIN=256 CPP="i686-pld-linux-gcc -E " srcdir=. sh ./osdef.sh i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 term.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 putenv.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 comm.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 kmapdef.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 screen.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 ansi.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 fileio.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 mark.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 misc.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 resize.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 socket.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 search.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 tty.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 window.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 utmp.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 loadav.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 help.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 termcap.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 input.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 attacher.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 pty.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 process.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 display.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 acls.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 braille.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 braille_tsi.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 logfile.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 layer.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 sched.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 teln.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 nethack.c i686-pld-linux-gcc -c -I. -I. -O2 -march=i686 -DMAXWIN=256 encoding.c i686-pld-linux-gcc -Wl,--as-needed -o screen screen.o ansi.o fileio.o mark.o misc.o resize.o socket.o search.o tty.o term.o window.o utmp.o loadav.o putenv.o help.o termcap.o input.o attacher.o pty.o process.o display.o comm.o kmapdef.o acls.o braille.o braille_tsi.o logfile.o layer.o sched.o teln.o nethack.o encoding.o -lcurses -lutempter -lcrypt -lpam + cd doc + rm -f screen.info screen.info-1 screen.info-2 screen.info-3 screen.info-4 screen.info-5 + makeinfo screen.texinfo screen.texinfo:2890: warning: Accent command `@'' must not be followed by whitespace. + exit 0 Executing(%install): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.34688 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp + umask 022 + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + /bin/rm --interactive=never -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder + /bin/mkdir -p /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder + cd screen-4.0.3 + rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder + install -d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/bin /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/screen/utf8encodings /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/skel /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/pam.d /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man//man1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/pl/man1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/info + install screen /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/bin + install doc/screen.1 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/man1 + install doc/screen.info /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/info + install etc/etcscreenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/screenrc + install /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/skel/.screenrc + install utf8encodings/01 utf8encodings/02 utf8encodings/03 utf8encodings/04 utf8encodings/18 utf8encodings/19 utf8encodings/a1 utf8encodings/bf utf8encodings/c2 utf8encodings/c3 utf8encodings/c4 utf8encodings/c6 utf8encodings/c7 utf8encodings/c8 utf8encodings/cc utf8encodings/cd utf8encodings/d6 /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/screen/utf8encodings + bzip2 -dc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen-non-english-man-pages.tar.bz2 + tar xf - -C /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man + install /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/screen.pamd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/etc/pam.d/screen + rm -f /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/man/README.screen-non-english-man-pages + __spec_install_post_strip Stripping 1 ELF executables...DONE + __spec_install_post_chrpath Remove RPATH/RUNPATH from 1 executable binaries and shared object files. + __spec_install_post_check_so Searching for shared objects with unresolved symbols... DONE + __spec_install_post_check_tmpfiles Checking /var/run <-> tmpfiles.d completeness... DONE + __spec_install_post_compress_docs Compress man pages: /usr/share/man Compress info pages: /usr/share/info + __spec_install_post_compress_modules + __spec_install_post_py_hardlink Processing files: screen-4.0.3-7 Executing(%doc): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.54498 + umask 022 + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + cd screen-4.0.3 + DOCDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3 + export DOCDIR + rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3 + /bin/mkdir -p /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3... Documentation compressed. + cp -pr NEWS README ChangeLog doc/FAQ doc/README.DOTSCREEN etc/screenrc /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder/usr/share/doc/screen-4.0.3... ./NEWS ./README ./ChangeLog ./FAQ ./README.DOTSCREEN ./screenrc Documentation compressed. + exit 0 Searching for required packages.... Provides: config(screen) = 0:4.0.3-7 Requires(interp): /sbin/postshell /sbin/postshell Requires(post): /sbin/postshell Requires(postun): /sbin/postshell Requires: glibc libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libcrypt.so.1 libcrypt.so.1(GLIBC_2.0) libpam.so.0 libtinfo.so.5 libutempter libutempter.so.0 ncurses pam-libs Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder warning: Could not canonicalize hostname: pldac-atlas Wrote: /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/RPMS/screen-4.0.3-7.i686.rpm Executing(%clean): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp /bin/sh -e /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/rpm-tmp.54498 + umask 022 + cd /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + cd screen-4.0.3 + /bin/rm --interactive=never -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder + rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD/tmp/screen-4.0.3-root-builder ended at: Tue Dec 4 23:54:27 2018, done in 0:00:30.902520 + chmod -R u+rwX /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD + rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/tmp /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330/BUILD copy rpm files to cache_dir: /var/cache/pld-builder/ready Creating pndir index of /var/cache/pld-builder/ready/ (type=dir)... Loading [dir]/var/cache/pld-builder/ready/... Writing /var/cache/pld-builder/ready/packages.ndir.gz... Begin-PLD-Builder-Info upgrading packages Preparing... ################################################## screen ################################################## End-PLD-Builder-Info + rm -rf /tmp/B.6b67e008-569b-483e-9bd6-01f35bfa6330 Begin-PLD-Builder-Info Build-Time: user:13.35s sys:1.21s real:40.08s (faults io:96 non-io:343775) Files queued for ftp: 672546 screen-4.0.3-7.i686.rpm 72 screen-4.0.3-7.src.rpm.uploadinfo End-PLD-Builder-Info