libsass c4bb4fd3-b229-4c92-8ece-0cbf071953e5

checking if we should skip the build
started at: Mon Oct 10 22:35:17 2016
fetching http://src.ac.pld-linux.org/~buildsrc//srpms/c4bb4fd3-b229-4c92-8ece-0cbf071953e5/libsass-3.3.6-1.src.rpm
fetched 304354 bytes, 164.8 K/s
installing srpm: libsass-3.3.6-1.src.rpm
+ install -d rpm/packages/libsass rpm/BUILD/libsass
+ rpm -Uhv --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' libsass-3.3.6-1.src.rpm
warning: libsass-3.3.6-1.src.rpm: Header V4 DSA signature: NOKEY, key ID e4323374
libsass                     ##################################################
+ rm -f libsass-3.3.6-1.src.rpm
+ TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp
+ exec nice -n 0 rpmbuild -bp --short-circuit --nodeps --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' --target ppc-pld-linux --define 'prep exit 0' rpm/packages/libsass/libsass.spec
Building target platforms: ppc-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	autoconf is needed by libsass-3.3.6-1.src
rpm: 	automake is needed by libsass-3.3.6-1.src
rpm: 	libstdc++-devel is needed by libsass-3.3.6-1.src
rpm: 	libtool is needed by libsass-3.3.6-1.src
rpm: 	pkgconfig is needed by libsass-3.3.6-1.src
rpm: Building target platforms: ppc-pld-linux
updating poldek cache...

Retrieving ac-main::packages.ndir.md...
Retrieving ac-main::packages.ndir.gz...
..............................done
Retrieving ac-main::packages.ndir.dscr.gz...
..............................done

Retrieving ac-updates::packages.ndir.md...
Retrieving ac-updates::packages.ndir.gz...
..............................done
Retrieving ac-updates::packages.ndir.dscr.gz...
..............................done
checking conflicting packages in BRed packages
poldek: Loading [dir]ready...
poldek: Loading [pndir]ac-main...
poldek: Loading [pndir]ac-updates...
poldek: 19260 packages read
poldek: Removed 4118 duplicate packages from available set
poldek: Processing dependencies...
poldek: libstdc++-devel-3.3.6-9 marks gcc-c++-3.3.6-9 (cap gcc-c++ = 5:3.3.6-9)
poldek: libstdc++-devel-3.3.6-9 marks libstdc++-3.3.6-9 (cap libstdc++ = 5:3.3.6-9)
poldek: autoconf-2.67-6 marks m4-1.4.14-1 (cap m4 = 3:1.4.14)
poldek: pkgconfig-0.26-4 marks glib2-2.16.1-3 (cap glib2)
poldek:  glib2-2.16.1-3 marks iconv-2.3.6-21 (cap iconv)
poldek:  glib2-2.16.1-3 marks fam-libs-2.7.0-6 (cap libfam.so.0)
poldek: There are 11 packages to install (6 marked by dependencies):
poldek: I autoconf-2.67-6  automake-1.10-1  libstdc++-devel-3.3.6-9
poldek: I libtool-1.5.26-2  pkgconfig-0.26-4
poldek: D fam-libs-2.7.0-6  gcc-c++-3.3.6-9  glib2-2.16.1-3  iconv-2.3.6-21
poldek: D libstdc++-3.3.6-9  m4-1.4.14-1
poldek: This operation will use 23.3MB of disk space.
poldek: Need to get 7.7MB of archives (7.7MB to download).
poldek: 
poldek: Retrieving [1/11] ac-updates::m4-1.4.14-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [2/11] ac-updates::autoconf-2.67-6.noarch.rpm...
poldek: ..............................done
poldek: Retrieving [3/11] ac-updates::libstdc++-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [4/11] ac-updates::gcc-c++-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [5/11] ac-updates::iconv-2.3.6-21.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [6/11] ac-updates::glib2-2.16.1-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [7/11] ac-updates::libstdc++-devel-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [8/11] ac-updates::libtool-1.5.26-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [9/11] ac-updates::pkgconfig-0.26-4.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [10/11] ac-main::automake-1.10-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [11/11] ac-main::fam-libs-2.7.0-6.ppc.rpm...
poldek: ..............................done
poldek: Executing rpm --upgrade -vh --test --root / --define _check_dirname_deps 0...
poldek: Preparing...                ##################################################
no conflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	autoconf is needed by libsass-3.3.6-1.src
rpm: 	automake is needed by libsass-3.3.6-1.src
rpm: 	libstdc++-devel is needed by libsass-3.3.6-1.src
rpm: 	libtool is needed by libsass-3.3.6-1.src
rpm: 	pkgconfig is needed by libsass-3.3.6-1.src
rpm: Building target platforms: ppc-pld-linux
installing BR: libstdc\+\+\-devel autoconf libtool pkgconfig automake
Loading [dir]ready...
Loading [pndir]ac-main...
Loading [pndir]ac-updates...
19260 packages read
Removed 4118 duplicate packages from available set
Processing dependencies...
libstdc++-devel-3.3.6-9 marks gcc-c++-3.3.6-9 (cap gcc-c++ = 5:3.3.6-9)
libstdc++-devel-3.3.6-9 marks libstdc++-3.3.6-9 (cap libstdc++ = 5:3.3.6-9)
There are 3 packages to install (2 marked by dependencies):
I libstdc++-devel-3.3.6-9
D gcc-c++-3.3.6-9  libstdc++-3.3.6-9
This operation will use 9.1MB of disk space.
Need to get 2.7MB of archives. 
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing...                ##################################################
libstdc++                   ##################################################
gcc-c++                     ##################################################
libstdc++-devel             ##################################################
Installing set #2
Processing dependencies...
There are 1 package to install:
I automake-1.10-1
This operation will use 1.3MB of disk space.
Need to get 510.7KB of archives. 
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing...                ##################################################
automake                    ##################################################
Installing set #3
Processing dependencies...
There are 1 package to install:
I libtool-1.5.26-2
This operation will use 1.9MB of disk space.
Need to get 435.3KB of archives. 
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing...                ##################################################
libtool                     ##################################################
Installing set #4
Processing dependencies...
autoconf-2.67-6 marks m4-1.4.14-1 (cap m4 = 3:1.4.14)
There are 2 packages to install (1 marked by dependencies):
I autoconf-2.67-6
D m4-1.4.14-1
This operation will use 2.7MB of disk space.
Need to get 1.4MB of archives. 
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing...                ##################################################
m4                          ##################################################
autoconf                    ##################################################
Installing set #5
Processing dependencies...
pkgconfig-0.26-4 marks glib2-2.16.1-3 (cap glib2)
 glib2-2.16.1-3 marks iconv-2.3.6-21 (cap iconv)
 glib2-2.16.1-3 marks fam-libs-2.7.0-6 (cap libfam.so.0)
There are 4 packages to install (3 marked by dependencies):
I pkgconfig-0.26-4
D fam-libs-2.7.0-6  glib2-2.16.1-3  iconv-2.3.6-21
This operation will use 8.4MB of disk space.
Need to get 2.7MB of archives. 
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing...                ##################################################
iconv                       ##################################################
fam-libs                    ##################################################
glib2                       ##################################################
pkgconfig                   ##################################################
building RPM using: set -ex; : build-id: c4bb4fd3-b229-4c92-8ece-0cbf071953e5; TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j1' --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}'  --target ppc-pld-linux rpm/packages/libsass/libsass.spec
+ : build-id: c4bb4fd3-b229-4c92-8ece-0cbf071953e5
+ TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp
+ exec nice -n 0 rpmbuild -bb --define '_smp_mflags -j1' --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' --target ppc-pld-linux rpm/packages/libsass/libsass.spec
Building target platforms: ppc-pld-linux
Executing(%prep): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp  /bin/sh -e /home/services/builder/rpm/BUILD/libsass/tmp/rpm-tmp.85393
+ umask 022
+ cd /home/services/builder/rpm/BUILD/libsass
+ cd /home/services/builder/rpm/BUILD/libsass
+ rm -rf libsass-3.3.6
+ /bin/gzip -dc /home/services/builder/rpm/packages/libsass/libsass-3.3.6.tar.gz
+ tar -xf -
+ STATUS=0
+ [ 0 -ne 0 ]
+ cd libsass-3.3.6
+ /bin/id -u
+ [ 182 = 0 ]
+ true .
+ /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): env -i PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin HOME=/home/services/builder TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp  /bin/sh -e /home/services/builder/rpm/BUILD/libsass/tmp/rpm-tmp.3366
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/home/services/builder/bin
HOME=/home/services/builder
TMPDIR=/home/services/builder/rpm/BUILD/libsass/tmp
+ umask 022
+ cd /home/services/builder/rpm/BUILD/libsass
+ cd libsass-3.3.6
+ aclocal
+ libtoolize --copy --force
Remember to add `AC_PROG_LIBTOOL' to `configure.ac'.
You should update your `aclocal.m4' by running aclocal.
Putting files in AC_CONFIG_AUX_DIR, `script'.
+ autoconf
+ autoheader
+ automake -a -c -f --foreign
configure.ac:14: option `parallel-tests' not recognized
error: Bad exit status from /home/services/builder/rpm/BUILD/libsass/tmp/rpm-tmp.3366 (%build)


RPM build errors:
    Bad exit status from /home/services/builder/rpm/BUILD/libsass/tmp/rpm-tmp.3366 (%build)
ended at: Mon Oct 10 22:39:50 2016, done in 0:01:00.019057
error: No files produced.
+ rpmbuild --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' --target ppc-pld-linux --nodeps --nobuild --clean --rmspec --rmsource rpm/packages/libsass/libsass.spec
Building target platforms: ppc-pld-linux
+ rm -rf /home/services/builder/rpm/BUILD/libsass/tmp
+ chmod -R u+rwX rpm/BUILD/libsass
+ rm -rf rpm/BUILD/libsass
Begin-PLD-Builder-Info
Build-Time: user:131.79s sys:54.10s real:281.17s (faults io:79 non-io:279421)

End-PLD-Builder-Info