Powered by Parallel thinking. Your IP: 3.233.221.90 | rpm 356c823c-fc27-4eeb-bd9d-9ec705d5a093Toc:- error 1
rpm: error: Failed build dependencies:
- error 2
poldek: error: LOOP:
- error 3
poldek: error: removing kpathsea-3.0-2.ppc "Requires(post): /usr/bin/texhash" from tsort relations.
- error 4
poldek: error: kpathsea-3.0-2.ppc Requires(post): /usr/bin/texhash
- error 5
poldek: error: removing tetex-3.0-2.ppc "Requires(auto): kpathsea" from tsort relations.
- error 6
poldek: error: tetex-3.0-2.ppc Requires(auto): kpathsea
- error 7
rpm: error: Failed build dependencies:
- error 8
error: Failed dependencies:
- error 9
error: LOOP:
- error 10
error: removing kpathsea-3.0-2.ppc "Requires(post): /usr/bin/texhash" from tsort relations.
- error 11
error: kpathsea-3.0-2.ppc Requires(post): /usr/bin/texhash
- error 12
error: removing tetex-3.0-2.ppc "Requires(auto): kpathsea" from tsort relations.
- error 13
error: tetex-3.0-2.ppc Requires(auto): kpathsea
- error 14
error: BR installation failed
Content:checking if we should skip the build
started at: Wed Dec 28 00:34:41 2016
fetching http://src.ac.pld-linux.org/~buildsrc//srpms/356c823c-fc27-4eeb-bd9d-9ec705d5a093/rpm-4.5-71.src.rpm
fetched 7280226 bytes, 803.4 K/s
installing srpm: rpm-4.5-71.src.rpm
+ install -d rpm/packages/rpm rpm/BUILD/rpm
+ rpm -Uhv --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' rpm-4.5-71.src.rpm
warning: rpm-4.5-71.src.rpm: Header V4 DSA signature: NOKEY, key ID ba246f6e
rpm ##################################################
+ rm -f rpm-4.5-71.src.rpm
+ TMPDIR=/home/services/builder/rpm/BUILD/rpm/tmp
+ exec nice -n 0 rpmbuild -bp --short-circuit --nodeps --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' --target ppc-pld-linux --define 'prep exit 0' rpm/packages/rpm/rpm.spec
Building target platforms: ppc-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: gettext-devel >= 0.11.4-2 is needed by rpm-4.5-71.src
rpm: libstdc++-devel is needed by rpm-4.5-71.src
rpm: python-devel >= 1:2.3 is needed by rpm-4.5-71.src
rpm: python-modules >= 1:2.3 is needed by rpm-4.5-71.src
rpm: rpm-perlprov is needed by rpm-4.5-71.src
rpm: rpm-pythonprov is needed by rpm-4.5-71.src
rpm: doxygen is needed by rpm-4.5-71.src
rpm: ghostscript is needed by rpm-4.5-71.src
rpm: graphviz is needed by rpm-4.5-71.src
rpm: tetex-pdftex is needed by rpm-4.5-71.src
rpm: Building target platforms: ppc-pld-linux
updating poldek cache...
Retrieving ac-main::packages.ndir.md...
ac-main is up to date
Retrieving ac-updates::packages.ndir.md...
ac-updates is up to date
checking conflicting packages in BRed packages
poldek: Loading [dir]ready...
poldek: Loading [pndir]ac-main...
poldek: Loading [pndir]ac-updates...
poldek: 19266 packages read
poldek: Removed 4116 duplicate packages from available set
poldek: Processing dependencies...
poldek: python-modules-2.4.6-2 marks gdbm-1.8.3-3 (cap gdbm)
poldek: python-modules-2.4.6-2 marks ncurses-ext-5.7-8 (cap libpanelw.so.5)
poldek: python-modules-2.4.6-2 marks python-libs-2.4.6-2 (cap python(abi) = 2.4)
poldek: libstdc++-devel-3.3.6-9 marks gcc-c++-3.3.6-9 (cap gcc-c++ = 5:3.3.6-9)
poldek: libstdc++-devel-3.3.6-9 marks libstdc++-3.3.6-9 (cap libstdc++ = 5:3.3.6-9)
poldek: ghostscript-7.07.1-1 marks X11-libs-6.9.0-19 (cap XFree86-libs)
poldek: X11-libs-6.9.0-19 marks X11-common-6.9.0-19 (cap X11-common = 1:6.9.0-19)
poldek: X11-libs-6.9.0-19 marks fontconfig-libs-2.4.2-1 (cap fontconfig-libs)
poldek: fontconfig-libs-2.4.2-1 marks freetype-2.4.3-1 (cap freetype)
poldek: ghostscript-7.07.1-1 marks cups-image-lib-1.3.10-3 (cap cups-image-lib)
poldek: cups-image-lib-1.3.10-3 marks cups-lib-1.3.10-3 (cap cups-lib)
poldek: cups-image-lib-1.3.10-3 marks libjpeg-6b-24 (cap libjpeg)
poldek: cups-image-lib-1.3.10-3 marks libpng-1.2.52-1 (cap libpng)
poldek: cups-image-lib-1.3.10-3 marks libtiff-3.9.4-2 (cap libtiff)
poldek: libtiff-3.9.4-2 marks jbigkit-1.5-3 (cap jbigkit)
poldek: ghostscript-7.07.1-1 marks glib2-2.16.1-3 (cap glib2)
poldek: glib2-2.16.1-3 marks iconv-2.3.6-21 (cap iconv)
poldek: glib2-2.16.1-3 marks fam-libs-2.7.0-6 (cap libfam.so.0)
poldek: ghostscript-7.07.1-1 marks compat-openssl-0.9.7m-9 (cap libcrypto.so.0.9.7)
poldek: graphviz-2.8-8 marks gd-2.0.35-1 (cap gd)
poldek: graphviz-2.8-8 marks ghostscript-fonts-std-6.0-10 (cap ghostscript-fonts-std)
poldek: graphviz-2.8-8 marks libltdl-1.5.26-2 (cap libltdl)
poldek: tetex-pdftex-3.0-2 marks tetex-3.0-2 (cap /usr/bin/texhash)
poldek: tetex-3.0-2 marks dialog-0.69-11 (cap dialog)
poldek: dialog-0.69-11 marks gpm-libs-1.20.1-10 (cap gpm-libs)
poldek: tetex-3.0-2 marks kpathsea-3.0-2 (cap kpathsea)
poldek: tetex-3.0-2 marks t1lib-5.1.2-4 (cap libt1.so.5)
poldek: t1lib-5.1.2-4 marks fontpostinst-0.1-9 (cap fontpostinst >= 0.1-6)
poldek: tetex-3.0-2 marks tetex-dirs-fonts-3.0-2 (cap tetex-dirs-fonts = 1:3.0-2)
poldek: tetex-3.0-2 marks tetex-fonts-cm-3.0-2 (cap tetex-fonts-cm = 1:3.0-2)
poldek: tetex-3.0-2 marks tetex-fonts-misc-3.0-2 (cap tetex-fonts-misc = 1:3.0-2)
poldek: tetex-pdftex-3.0-2 marks tetex-fonts-type1-bluesky-3.0-2 (cap tetex-fonts-type1-bluesky = 1:3.0-2)
poldek: gettext-devel-0.17-3 marks libcroco-0.6.1-1 (cap libcroco)
poldek: python-devel-2.4.6-2 marks python-2.4.6-2 (cap /usr/bin/python)
poldek: rpm-perlprov-4.5-70 marks perl-devel-5.8.8-13 (cap perl-devel)
poldek: perl-devel-5.8.8-13 marks perl-tools-pod-5.8.8-13 (cap perl-tools-pod = 1:5.8.8-13)
poldek: There are 46 packages to install (36 marked by dependencies):
poldek: I doxygen-1.4.4-1 gettext-devel-0.17-3 ghostscript-7.07.1-1
poldek: I graphviz-2.8-8 libstdc++-devel-3.3.6-9 python-devel-2.4.6-2
poldek: I python-modules-2.4.6-2 rpm-perlprov-4.5-70 rpm-pythonprov-4.5-70
poldek: I tetex-pdftex-3.0-2
poldek: D X11-common-6.9.0-19 X11-libs-6.9.0-19 compat-openssl-0.9.7m-9
poldek: D cups-image-lib-1.3.10-3 cups-lib-1.3.10-3 dialog-0.69-11
poldek: D fam-libs-2.7.0-6 fontconfig-libs-2.4.2-1 fontpostinst-0.1-9
poldek: D freetype-2.4.3-1 gcc-c++-3.3.6-9 gd-2.0.35-1 gdbm-1.8.3-3
poldek: D ghostscript-fonts-std-6.0-10 glib2-2.16.1-3 gpm-libs-1.20.1-10
poldek: D iconv-2.3.6-21 jbigkit-1.5-3 kpathsea-3.0-2 libcroco-0.6.1-1
poldek: D libjpeg-6b-24 libltdl-1.5.26-2 libpng-1.2.52-1 libstdc++-3.3.6-9
poldek: D libtiff-3.9.4-2 ncurses-ext-5.7-8 perl-devel-5.8.8-13
poldek: D perl-tools-pod-5.8.8-13 python-2.4.6-2 python-libs-2.4.6-2
poldek: D t1lib-5.1.2-4 tetex-3.0-2 tetex-dirs-fonts-3.0-2
poldek: D tetex-fonts-cm-3.0-2 tetex-fonts-misc-3.0-2
poldek: D tetex-fonts-type1-bluesky-3.0-2
poldek: This operation will use 96.7MB of disk space.
poldek: Need to get 33.9MB of archives (33.9MB to download).
poldek:
poldek: Retrieving [1/46] ac-main::X11-common-6.9.0-19.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [2/46] ac-main::fontconfig-libs-2.4.2-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [3/46] ac-main::X11-libs-6.9.0-19.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [4/46] ac-main::libjpeg-6b-24.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [5/46] ac-main::jbigkit-1.5-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [6/46] ac-main::gpm-libs-1.20.1-10.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [7/46] ac-main::dialog-0.69-11.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [8/46] ac-main::doxygen-1.4.4-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [9/46] ac-main::fam-libs-2.7.0-6.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [10/46] ac-main::fontpostinst-0.1-9.noarch.rpm...
poldek: ..............................done
poldek: Retrieving [11/46] ac-main::gdbm-1.8.3-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [12/46] ac-main::libcroco-0.6.1-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [13/46] ac-main::ghostscript-7.07.1-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [14/46] ac-main::ghostscript-fonts-std-6.0-10.noarch.rpm...
poldek: ..............................done
poldek: Retrieving [15/46] ac-main::tetex-dirs-fonts-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [16/46] ac-main::tetex-fonts-cm-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [17/46] ac-main::tetex-fonts-misc-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [18/46] ac-main::tetex-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [19/46] ac-main::kpathsea-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [20/46] ac-main::tetex-fonts-type1-bluesky-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [21/46] ac-main::tetex-pdftex-3.0-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [22/46] ac-updates::freetype-2.4.3-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [23/46] ac-updates::compat-openssl-0.9.7m-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [24/46] ac-updates::cups-lib-1.3.10-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [25/46] ac-updates::libpng-1.2.52-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [26/46] ac-updates::libtiff-3.9.4-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [27/46] ac-updates::cups-image-lib-1.3.10-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [28/46] ac-updates::libstdc++-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [29/46] ac-updates::gcc-c++-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [30/46] ac-updates::gd-2.0.35-1.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [31/46] ac-updates::iconv-2.3.6-21.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [32/46] ac-updates::glib2-2.16.1-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [33/46] ac-updates::gettext-devel-0.17-3.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [34/46] ac-updates::libltdl-1.5.26-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [35/46] ac-updates::graphviz-2.8-8.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [36/46] ac-updates::t1lib-5.1.2-4.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [37/46] ac-updates::libstdc++-devel-3.3.6-9.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [38/46] ac-updates::ncurses-ext-5.7-8.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [39/46] ac-updates::perl-tools-pod-5.8.8-13.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [40/46] ac-updates::perl-devel-5.8.8-13.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [41/46] ac-updates::python-libs-2.4.6-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [42/46] ac-updates::python-2.4.6-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [43/46] ac-updates::python-devel-2.4.6-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [44/46] ac-updates::python-modules-2.4.6-2.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [45/46] ac-updates::rpm-perlprov-4.5-70.ppc.rpm...
poldek: ..............................done
poldek: Retrieving [46/46] ac-updates::rpm-pythonprov-4.5-70.ppc.rpm...
poldek: ..............................done
poldek: Executing rpm --upgrade -vh --test --root / --define _check_dirname_deps 0...
poldek: error: LOOP:
poldek: error: removing kpathsea-3.0-2.ppc "Requires(post): /usr/bin/texhash" from tsort relations.
poldek: error: kpathsea-3.0-2.ppc Requires(post): /usr/bin/texhash
poldek: error: removing tetex-3.0-2.ppc "Requires(auto): kpathsea" from tsort relations.
poldek: error: tetex-3.0-2.ppc Requires(auto): kpathsea
poldek: Preparing... ##################################################
no conflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: gettext-devel >= 0.11.4-2 is needed by rpm-4.5-71.src
rpm: libstdc++-devel is needed by rpm-4.5-71.src
rpm: python-devel >= 1:2.3 is needed by rpm-4.5-71.src
rpm: python-modules >= 1:2.3 is needed by rpm-4.5-71.src
rpm: rpm-perlprov is needed by rpm-4.5-71.src
rpm: rpm-pythonprov is needed by rpm-4.5-71.src
rpm: doxygen is needed by rpm-4.5-71.src
rpm: ghostscript is needed by rpm-4.5-71.src
rpm: graphviz is needed by rpm-4.5-71.src
rpm: tetex-pdftex is needed by rpm-4.5-71.src
rpm: Building target platforms: ppc-pld-linux
installing BR: python\-modules doxygen libstdc\+\+\-devel python\-devel rpm\-perlprov graphviz ghostscript gettext\-devel tetex\-pdftex rpm\-pythonprov
Loading [dir]ready...
Loading [pndir]ac-main...
Loading [pndir]ac-updates...
19266 packages read
Removed 4116 duplicate packages from available set
Processing dependencies...
python-modules-2.4.6-2 marks gdbm-1.8.3-3 (cap gdbm)
python-modules-2.4.6-2 marks ncurses-ext-5.7-8 (cap libpanelw.so.5)
python-modules-2.4.6-2 marks python-libs-2.4.6-2 (cap python(abi) = 2.4)
python-devel-2.4.6-2 marks python-2.4.6-2 (cap /usr/bin/python)
python-2.4.6-2 marks libstdc++-3.3.6-9 (cap libstdc++)
There are 7 packages to install (5 marked by dependencies):
I python-devel-2.4.6-2 python-modules-2.4.6-2
D gdbm-1.8.3-3 libstdc++-3.3.6-9 ncurses-ext-5.7-8 python-2.4.6-2
D python-libs-2.4.6-2
This operation will use 11.3MB of disk space.
Need to get 3.4MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
python-libs ##################################################
ncurses-ext ##################################################
libstdc++ ##################################################
python ##################################################
gdbm ##################################################
python-devel ##################################################
python-modules ##################################################
Installing set #2
Processing dependencies...
libstdc++-devel-3.3.6-9 marks gcc-c++-3.3.6-9 (cap gcc-c++ = 5:3.3.6-9)
There are 2 packages to install (1 marked by dependencies):
I libstdc++-devel-3.3.6-9
D gcc-c++-3.3.6-9
This operation will use 7.5MB of disk space.
Need to get 2.2MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
gcc-c++ ##################################################
libstdc++-devel ##################################################
Installing set #3
Processing dependencies...
ghostscript-7.07.1-1 marks X11-libs-6.9.0-19 (cap XFree86-libs)
X11-libs-6.9.0-19 marks X11-common-6.9.0-19 (cap X11-common = 1:6.9.0-19)
X11-libs-6.9.0-19 marks fontconfig-libs-2.4.2-1 (cap fontconfig-libs)
fontconfig-libs-2.4.2-1 marks freetype-2.4.3-1 (cap freetype)
ghostscript-7.07.1-1 marks cups-image-lib-1.3.10-3 (cap cups-image-lib)
cups-image-lib-1.3.10-3 marks cups-lib-1.3.10-3 (cap cups-lib)
cups-image-lib-1.3.10-3 marks libjpeg-6b-24 (cap libjpeg)
cups-image-lib-1.3.10-3 marks libpng-1.2.52-1 (cap libpng)
cups-image-lib-1.3.10-3 marks libtiff-3.9.4-2 (cap libtiff)
libtiff-3.9.4-2 marks jbigkit-1.5-3 (cap jbigkit)
ghostscript-7.07.1-1 marks glib2-2.16.1-3 (cap glib2)
glib2-2.16.1-3 marks iconv-2.3.6-21 (cap iconv)
glib2-2.16.1-3 marks fam-libs-2.7.0-6 (cap libfam.so.0)
ghostscript-7.07.1-1 marks compat-openssl-0.9.7m-9 (cap libcrypto.so.0.9.7)
There are 15 packages to install (14 marked by dependencies):
I ghostscript-7.07.1-1
D X11-common-6.9.0-19 X11-libs-6.9.0-19 compat-openssl-0.9.7m-9
D cups-image-lib-1.3.10-3 cups-lib-1.3.10-3 fam-libs-2.7.0-6
D fontconfig-libs-2.4.2-1 freetype-2.4.3-1 glib2-2.16.1-3
D iconv-2.3.6-21 jbigkit-1.5-3 libjpeg-6b-24 libpng-1.2.52-1
D libtiff-3.9.4-2
This operation will use 33.7MB of disk space.
Need to get 9.2MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
libjpeg ##################################################
jbigkit ##################################################
X11-common ##################################################
libtiff ##################################################
libpng ##################################################
cups-lib ##################################################
freetype ##################################################
fontconfig-libs ##################################################
X11-libs ##################################################
cups-image-lib ##################################################
iconv ##################################################
fam-libs ##################################################
glib2 ##################################################
compat-openssl ##################################################
ghostscript ##################################################
Installing set #4
Processing dependencies...
graphviz-2.8-8 marks gd-2.0.35-1 (cap gd)
graphviz-2.8-8 marks ghostscript-fonts-std-6.0-10 (cap ghostscript-fonts-std)
graphviz-2.8-8 marks libltdl-1.5.26-2 (cap libltdl)
There are 4 packages to install (3 marked by dependencies):
I graphviz-2.8-8
D gd-2.0.35-1 ghostscript-fonts-std-6.0-10 libltdl-1.5.26-2
This operation will use 7.0MB of disk space.
Need to get 3.5MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
error: Failed dependencies:
fontpostinst is needed by ghostscript-fonts-std-6.0-10.noarch
Installing set #5
Processing dependencies...
tetex-pdftex-3.0-2 marks tetex-3.0-2 (cap /usr/bin/texhash)
tetex-3.0-2 marks dialog-0.69-11 (cap dialog)
dialog-0.69-11 marks gpm-libs-1.20.1-10 (cap gpm-libs)
tetex-3.0-2 marks gd-2.0.35-1 (cap gd)
tetex-3.0-2 marks kpathsea-3.0-2 (cap kpathsea)
tetex-3.0-2 marks t1lib-5.1.2-4 (cap libt1.so.5)
t1lib-5.1.2-4 marks fontpostinst-0.1-9 (cap fontpostinst >= 0.1-6)
tetex-3.0-2 marks tetex-dirs-fonts-3.0-2 (cap tetex-dirs-fonts = 1:3.0-2)
tetex-3.0-2 marks tetex-fonts-cm-3.0-2 (cap tetex-fonts-cm = 1:3.0-2)
tetex-3.0-2 marks tetex-fonts-misc-3.0-2 (cap tetex-fonts-misc = 1:3.0-2)
tetex-pdftex-3.0-2 marks tetex-fonts-type1-bluesky-3.0-2 (cap tetex-fonts-type1-bluesky = 1:3.0-2)
There are 12 packages to install (11 marked by dependencies):
I tetex-pdftex-3.0-2
D dialog-0.69-11 fontpostinst-0.1-9 gd-2.0.35-1 gpm-libs-1.20.1-10
D kpathsea-3.0-2 t1lib-5.1.2-4 tetex-3.0-2 tetex-dirs-fonts-3.0-2
D tetex-fonts-cm-3.0-2 tetex-fonts-misc-3.0-2
D tetex-fonts-type1-bluesky-3.0-2
This operation will use 22.9MB of disk space.
Need to get 11.0MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
error: LOOP:
error: removing kpathsea-3.0-2.ppc "Requires(post): /usr/bin/texhash" from tsort relations.
error: kpathsea-3.0-2.ppc Requires(post): /usr/bin/texhash
error: removing tetex-3.0-2.ppc "Requires(auto): kpathsea" from tsort relations.
error: tetex-3.0-2.ppc Requires(auto): kpathsea
Preparing... ##################################################
gd ##################################################
gpm-libs ##################################################
tetex-dirs-fonts ##################################################
tetex-fonts-cm ##################################################
tetex-fonts-misc ##################################################
tetex-fonts-type1-bluesky ##################################################
dialog ##################################################
fontpostinst ##################################################
t1lib ##################################################
Searching for Type 1 fonts and AFM files...
No Type 1 fonts were found in the expected locations.
If you want t1lib to be aware of your fonts, you should run
/usr/bin/t1libconfig with the names of your local font directories as
arguments, or you should edit the /etc/t1lib/FontDatabase file manually.
See the FontDatabase(5) manual page for more information.
kpathsea ##################################################
tetex ##################################################
tetex-pdftex ##################################################
Installing set #6
Processing dependencies...
There are 1 package to install:
I doxygen-1.4.4-1
This operation will use 5.2MB of disk space.
Need to get 1.8MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
doxygen ##################################################
Installing set #7
Processing dependencies...
gettext-devel-0.17-3 marks libcroco-0.6.1-1 (cap libcroco)
There are 2 packages to install (1 marked by dependencies):
I gettext-devel-0.17-3
D libcroco-0.6.1-1
This operation will use 6.0MB of disk space.
Need to get 1.8MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
libcroco ##################################################
gettext-devel ##################################################
Installing set #8
Processing dependencies...
rpm-perlprov-4.5-70 marks perl-devel-5.8.8-13 (cap perl-devel)
perl-devel-5.8.8-13 marks perl-tools-pod-5.8.8-13 (cap perl-tools-pod = 1:5.8.8-13)
There are 4 packages to install (2 marked by dependencies):
I rpm-perlprov-4.5-70 rpm-pythonprov-4.5-70
D perl-devel-5.8.8-13 perl-tools-pod-5.8.8-13
This operation will use 3.4MB of disk space.
Need to get 1.1MB of archives.
Executing rpm --upgrade -vh --root / --define _check_dirname_deps 0...
Preparing... ##################################################
perl-tools-pod ##################################################
rpm-pythonprov ##################################################
perl-devel ##################################################
rpm-perlprov ##################################################
error: BR installation failed
+ rpmbuild --define '_topdir %(echo $HOME/rpm)' --define '_specdir %{_topdir}/packages/%{name}' --define '_sourcedir %{_specdir}' --define '_builddir %{_topdir}/BUILD/%{name}' --target ppc-pld-linux --nodeps --nobuild --clean --rmspec --rmsource rpm/packages/rpm/rpm.spec
Building target platforms: ppc-pld-linux
+ rm -rf /home/services/builder/rpm/BUILD/rpm/tmp
+ chmod -R u+rwX rpm/BUILD/rpm
+ rm -rf rpm/BUILD/rpm
Begin-PLD-Builder-Info
Build-Time: user:207.32s sys:168.35s real:976.22s (faults io:101 non-io:860582)
End-PLD-Builder-Info
|
|
