# src  : https://buildlogs.pld-linux.org/pld/th/SRPMS/OK/gperf,0abf89fb-0c96-43cd-87bd-734d4c44d662.bz2
# date   : 2025/04/14 20:36:24
request from: qboosh
started at: Mon Apr 14 20:36:19 2025
building SRPM using: cd rpm/packages; nice -n 0 ./builder -nu -nm --nodeps --http --define '_pld_builder 1' -bs  -r HEAD  -Tp auto/th/ -tt   gperf.spec 2>&1

builder: SMP make flags are set to -j3
Cloning into 'gperf'...
From git://git.pld-linux.org/packages/gperf
 * [new ref]         refs/notes/commits -> refs/notes/commits
Already up to date.
Available branches: AC-branch RA-branch master
Searching for tag auto/th/gperf-3.2-1...
Searching for tag auto/th/gperf-3_2-1...
--2025-04-14 20:36:20--  http://distfiles.pld-linux.org/distfiles/by-md5/6/1/61baa3bc6724b57a7895c255f1739f1f/gperf-3.2.tar.gz
Resolving distfiles.pld-linux.org... 193.239.45.41
Connecting to distfiles.pld-linux.org|193.239.45.41|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1268603 (1.2M) [application/x-gzip]
Saving to: 'gperf-3.2.tar.gz'

     0K .......... .......... .......... .......... ..........  4%  962K 1s
    50K .......... .......... .......... .......... ..........  8% 1.92M 1s
   100K .......... .......... .......... .......... .......... 12% 3.32M 1s
   150K .......... .......... .......... .......... .......... 16% 4.48M 1s
   200K .......... .......... .......... .......... .......... 20% 6.21M 0s
   250K .......... .......... .......... .......... .......... 24% 7.89M 0s
   300K .......... .......... .......... .......... .......... 28% 8.31M 0s
   350K .......... .......... .......... .......... .......... 32% 9.44M 0s
   400K .......... .......... .......... .......... .......... 36% 11.0M 0s
   450K .......... .......... .......... .......... .......... 40% 15.2M 0s
   500K .......... .......... .......... .......... .......... 44% 12.9M 0s
   550K .......... .......... .......... .......... .......... 48% 15.0M 0s
   600K .......... .......... .......... .......... .......... 52% 16.8M 0s
   650K .......... .......... .......... .......... .......... 56% 19.6M 0s
   700K .......... .......... .......... .......... .......... 60% 18.3M 0s
   750K .......... .......... .......... .......... .......... 64% 20.7M 0s
   800K .......... .......... .......... .......... .......... 68% 26.8M 0s
   850K .......... .......... .......... .......... .......... 72% 21.8M 0s
   900K .......... .......... .......... .......... .......... 76% 24.3M 0s
   950K .......... .......... .......... .......... .......... 80% 30.7M 0s
  1000K .......... .......... .......... .......... .......... 84% 26.3M 0s
  1050K .......... .......... .......... .......... .......... 88% 25.2M 0s
  1100K .......... .......... .......... .......... .......... 92% 44.3M 0s
  1150K .......... .......... .......... .......... .......... 96% 21.9M 0s
  1200K .......... .......... .......... ........             100% 52.1M=0.2s

2025-04-14 20:36:21 (7.17 MB/s) - 'gperf-3.2.tar.gz' saved [1268603/1268603]

./builder[2765]: ulimit: unlimited exceeds allowable coredump(blocks) limit
Building target platforms: x86_64-linux
Building for target x86_64-linux
warning: Could not canonicalize hostname: ep09-pld
Wrote: /home/users/builder/rpm/SRPMS/gperf-3.2-1.src.rpm

RPM build warnings:
    Could not canonicalize hostname: ep09-pld
real 0.17
user 0.14
sys 0.02
exit status 0
Tagging with prefix: auto/th/
Version: 3.2
Release: 1
tag: auto/th/gperf-3.2-1
Searching for tag auto/th/gperf-3.2-1...
remote: Pushing to github mirror...        
remote: ...done        
To ssh://git.pld-linux.org/packages/gperf
 * [new tag]         auto/th/gperf-3.2-1 -> auto/th/gperf-3.2-1
error: Macro %_builddir has empty body
Begin-PLD-Builder-Info
Build-Time: user:1.15s sys:1.00s real:4.56s (faults io:15 non-io:123501)

Files queued for ftp:
   1286002 gperf-3.2-1.src.rpm
       185 gperf-3.2-1.src.rpm.uploadinfo

End-PLD-Builder-Info